Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Electric Range Replace Thermal Cut-Out Fuse #318005229
Kenmore Electric Range Replace Thermal Cut-Out Fuse #318005229
Skill Level
Total Parts Cost
$40.85Estimated Savings
$112.5005:51
- Description
This video provides step-by-step instructions for replacing the thermal cut-out fuse on Kenmore and Frigidaire electric ranges. The most common reason for replacing the fuse is when it burns out, causing the oven to not heat.
All of the information in this fuse replacement video is applicable to the following brands: Frigidaire, Kenmore
Tools used: multi-screwdriver, string, flat-head bit, Phillips head bit
All of the information in this fuse replacement video is applicable to the following brands: Frigidaire, Kenmore
Tools used: multi-screwdriver, string, flat-head bit, Phillips head bit
Step By Step Instructions
1
To replace the thermal cut-out in your range, you will first need to move the appliance away from the wall and countertop.
2
Now, unplug the power cord.
3
Next, remove the control knobs – you can use wire or string to help pull them off.
4
Use a flathead screwdriver to help remove the top panel retainers.
5
Now lift the top panel off and disconnect the oven control wire harnesses.
6
Next, remove the screws securing the control bracket.
7
Remove the screw securing the grounding wire as well.
8
Disconnect the surface element wire harnesses and set the bracket aside.
9
Open the door and remove the screws securing the bottom of the control cover.
10
Now remove the screws on top and set the cover aside.
11
Pull the gasket free of the glass top.
12
Remove the screws securing the main top assembly.
13
Note the position of the wire harnesses then lift the main top assembly up and pull it forward to remove.
14
Now detach the wires from the old thermal cut-out.
15
Remove the mounting screws to release the cut-out.
16
Install the new thermal cut-out by aligning it on the duct then replace the mounting screws to secure.
17
Connect the wires to the new cut-out.
18
Reposition the main top assembly, making sure the wire harnesses are properly positioned.
19
Secure the main top screws.
20
Realign the gasket.
21
Reposition the control cover and replace the screws to secure.
22
Reconnect the surface element wire harnesses.
23
Realign the control bracket and secure the grounding wire with the screw.
24
Replace the mounting screws.
25
Reconnect the oven control wire harnesses.
26
Realign the top panel and replace the retainers to secure.
27
Replace the control knobs.
28
With the repair completed, plug the power cord back in and carefully slide the range back into place.
Description
This video provides step-by-step instructions for replacing the thermal cut-out fuse on Kenmore and Frigidaire electric ranges. The most common reason for replacing the fuse is when it burns out, causing the oven to not heat.
All of the information in this fuse replacement video is applicable to the following brands: Frigidaire, Kenmore
Tools used: multi-screwdriver, string, flat-head bit, Phillips head bit
All of the information in this fuse replacement video is applicable to the following brands: Frigidaire, Kenmore
Tools used: multi-screwdriver, string, flat-head bit, Phillips head bit
Step-By-Step Instructions
1
To replace the thermal cut-out in your range, you will first need to move the appliance away from the wall and countertop.
2
Now, unplug the power cord.
3
Next, remove the control knobs – you can use wire or string to help pull them off.
4
Use a flathead screwdriver to help remove the top panel retainers.
5
Now lift the top panel off and disconnect the oven control wire harnesses.
6
Next, remove the screws securing the control bracket.
7
Remove the screw securing the grounding wire as well.
8
Disconnect the surface element wire harnesses and set the bracket aside.
9
Open the door and remove the screws securing the bottom of the control cover.
10
Now remove the screws on top and set the cover aside.
11
Pull the gasket free of the glass top.
12
Remove the screws securing the main top assembly.
13
Note the position of the wire harnesses then lift the main top assembly up and pull it forward to remove.
14
Now detach the wires from the old thermal cut-out.
15
Remove the mounting screws to release the cut-out.
16
Install the new thermal cut-out by aligning it on the duct then replace the mounting screws to secure.
17
Connect the wires to the new cut-out.
18
Reposition the main top assembly, making sure the wire harnesses are properly positioned.
19
Secure the main top screws.
20
Realign the gasket.
21
Reposition the control cover and replace the screws to secure.
22
Reconnect the surface element wire harnesses.
23
Realign the control bracket and secure the grounding wire with the screw.
24
Replace the mounting screws.
25
Reconnect the oven control wire harnesses.
26
Realign the top panel and replace the retainers to secure.
27
Replace the control knobs.
28
With the repair completed, plug the power cord back in and carefully slide the range back into place.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com