Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Oven Won't Turn On? Replace Control Board #318296822
Kenmore Oven Won't Turn On? Replace Control Board #318296822
Skill Level
Total Parts Cost
$543.76Estimated Savings
$112.5002:46
- Description
This video provides step-by-step instructions for replacing the oven control board on Kenmore electric ranges. The most common reasons for replacing the oven control board are when the oven won’t heat, won’t turn on, won’t turn off, or won’t bake evenly, but other more common causes have been ruled out.
All of the information in this control board replacement video is applicable to the following brands: Kenmore
Tools used: multi-screwdriver, string, flat-head bit, Phillips head bit
All of the information in this control board replacement video is applicable to the following brands: Kenmore
Tools used: multi-screwdriver, string, flat-head bit, Phillips head bit
Step By Step Instructions
1
As with most repairs, you should unplug the power cord first.
2
To do this, you will probably need to pull the range away from the wall.
3
To replace the oven control board in your range first remove the control knobs – you can use wire or string to help pull them off.
4
Next, use a flathead screwdriver to help remove the top panel retainers.
5
Now lift the top panel off.
6
Note the orientation of the wires attached to the oven control board then disconnect them.
7
Remove the mounting screws to release the old oven control board from the panel.
8
Install the new oven control board
9
By aligning it on the panel then replace the mounting screws to secure.
10
Connect the wires to the appropriate terminals on the new board.
11
Realign the top panel and replace the retainers to secure.
12
Replace the control knobs.
13
With the repair completed, plug the power cord back in and carefully slide the range back into place.
Description
This video provides step-by-step instructions for replacing the oven control board on Kenmore electric ranges. The most common reasons for replacing the oven control board are when the oven won’t heat, won’t turn on, won’t turn off, or won’t bake evenly, but other more common causes have been ruled out.
All of the information in this control board replacement video is applicable to the following brands: Kenmore
Tools used: multi-screwdriver, string, flat-head bit, Phillips head bit
All of the information in this control board replacement video is applicable to the following brands: Kenmore
Tools used: multi-screwdriver, string, flat-head bit, Phillips head bit
Step-By-Step Instructions
1
As with most repairs, you should unplug the power cord first.
2
To do this, you will probably need to pull the range away from the wall.
3
To replace the oven control board in your range first remove the control knobs – you can use wire or string to help pull them off.
4
Next, use a flathead screwdriver to help remove the top panel retainers.
5
Now lift the top panel off.
6
Note the orientation of the wires attached to the oven control board then disconnect them.
7
Remove the mounting screws to release the old oven control board from the panel.
8
Install the new oven control board
9
By aligning it on the panel then replace the mounting screws to secure.
10
Connect the wires to the appropriate terminals on the new board.
11
Realign the top panel and replace the retainers to secure.
12
Replace the control knobs.
13
With the repair completed, plug the power cord back in and carefully slide the range back into place.
Applicable Product Model
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com