Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Microwave Turntable Motor Replacement #WB26X10233
GE Microwave Turntable Motor Replacement #WB26X10233
Skill Level
Total Parts Cost
$44.62Estimated Savings
$112.5001:41
- Description
This video provides step-by-step repair instructions for replacing the turntable motor on a GE microwave. The most common reasons for replacing the turntable motor are when the turntable isn't turning or the microwave is noisy.
All of the information for this turntable motor replacement video is applicable to the following brands:
GE
Tools used: multi-screwdriver, Phillips head bit
All of the information for this turntable motor replacement video is applicable to the following brands:
GE
Tools used: multi-screwdriver, Phillips head bit
Step By Step Instructions
1
As with most repairs, you should unplug the power cord first.
2
To replace the turntable motor in your microwave oven, remove all of the screws securing the bottom panel. and carefully lower the panel.
3
Disconnect the wire harness from the turntable motor.
4
Remove the mounting screw then rotate the old motor clockwise to detach.
5
Install the new turntable motor. by inserting the shaft into the drive coupler.
6
Rotate the motor counter-clockwise and replace the mounting screw.
7
Connect the wire harness to the new motor.
8
Reposition the bottom panel and replace the screws to secure.
9
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the turntable motor on a GE microwave. The most common reasons for replacing the turntable motor are when the turntable isn't turning or the microwave is noisy.
All of the information for this turntable motor replacement video is applicable to the following brands:
GE
Tools used: multi-screwdriver, Phillips head bit
All of the information for this turntable motor replacement video is applicable to the following brands:
GE
Tools used: multi-screwdriver, Phillips head bit
Step-By-Step Instructions
1
As with most repairs, you should unplug the power cord first.
2
To replace the turntable motor in your microwave oven, remove all of the screws securing the bottom panel. and carefully lower the panel.
3
Disconnect the wire harness from the turntable motor.
4
Remove the mounting screw then rotate the old motor clockwise to detach.
5
Install the new turntable motor. by inserting the shaft into the drive coupler.
6
Rotate the motor counter-clockwise and replace the mounting screw.
7
Connect the wire harness to the new motor.
8
Reposition the bottom panel and replace the screws to secure.
9
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Turntable Motor
$44.62
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com