Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairYork Furnace Lower Pressure Switch Replacement #S1-02435812000
York Furnace Lower Pressure Switch Replacement #S1-02435812000
Skill Level
Total Parts Cost
$44.63Estimated Savings
$112.5001:44
- Description
This video provides step-by-step repair instructions for replacing the lower pressure switch on a York furnace. The most common reasons for replacing the pressure switch are when the furnace won't heat or when the furnace shuts off after a few minutes.
All of the information for this lower pressure switch replacement video is applicable to the following brands:
York
Tools used: multi screwdriver, flat head bit, Phillips head bit
All of the information for this lower pressure switch replacement video is applicable to the following brands:
York
Tools used: multi screwdriver, flat head bit, Phillips head bit
Step By Step Instructions
1
To replace the lower pressure switch in your furnace first shut off the power to the furnace.
2
Next, rotate the knobs securing the combustion chamber panel and pull the panel off.
3
Now disconnect the pressure switch wires.
4
Detach the vacuum tube.
5
Use a small phillips-head screwdriver to remove the pressure switch mounting screw and pull the old switch off.
6
Install the new pressure switch by aligning it on the draft inducer housing then replace the mounting screw to secure.
7
Attach the vacuum tube and connect the wires.
8
Reposition the combustion chamber panel and rotate the knobs to secure.
9
With the repair completed, turn the power back on and your furnace should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the lower pressure switch on a York furnace. The most common reasons for replacing the pressure switch are when the furnace won't heat or when the furnace shuts off after a few minutes.
All of the information for this lower pressure switch replacement video is applicable to the following brands:
York
Tools used: multi screwdriver, flat head bit, Phillips head bit
All of the information for this lower pressure switch replacement video is applicable to the following brands:
York
Tools used: multi screwdriver, flat head bit, Phillips head bit
Step-By-Step Instructions
1
To replace the lower pressure switch in your furnace first shut off the power to the furnace.
2
Next, rotate the knobs securing the combustion chamber panel and pull the panel off.
3
Now disconnect the pressure switch wires.
4
Detach the vacuum tube.
5
Use a small phillips-head screwdriver to remove the pressure switch mounting screw and pull the old switch off.
6
Install the new pressure switch by aligning it on the draft inducer housing then replace the mounting screw to secure.
7
Attach the vacuum tube and connect the wires.
8
Reposition the combustion chamber panel and rotate the knobs to secure.
9
With the repair completed, turn the power back on and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Pressure Switch
$44.63
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com