Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHomelite Chainsaw On/Off Switch Replacement #760338002
Homelite Chainsaw On/Off Switch Replacement #760338002
Skill Level
Total Parts Cost
$3.53Estimated Savings
$112.5002:05
- Description
This video provides step-by-step repair instructions for replacing the on/off switch on a Homelite chainsaw. The most common reasons for replacing the on/off switch are when the switch doesn’t snap firmly into the on and off positions or when the chainsaw won’t start.
All of the information for this on/off switch replacement video is applicable to the following brands:
Homelite, Ryobi
Tools used: T25 Torx screwdriver, needle-nose pliers, flat head screwdriver
All of the information for this on/off switch replacement video is applicable to the following brands:
Homelite, Ryobi
Tools used: T25 Torx screwdriver, needle-nose pliers, flat head screwdriver
Step By Step Instructions
1
Before you replace the on-off switch on your chainsaw first make sure the engine has cooled and that the switch is in the “off” position.
2
Now use a t-25 torx bit screwdriver to unthread the screws securing the top cover.
3
Pull the cover off – this may require some effort.
4
Next, disconnect the wires from the old on-off switch.
5
Use a small flathead screwdriver to depress the retaining tabs to release the old switch.
6
Install the new on-off switch by inserting it into the mounting bracket until it snaps into place.
7
Connect the wires to the appropriate terminals on the new switch.
8
Realign the top cover and replace the screws to secure.
9
Turn the new switch to the “on” position and your chainsaw should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the on/off switch on a Homelite chainsaw. The most common reasons for replacing the on/off switch are when the switch doesn’t snap firmly into the on and off positions or when the chainsaw won’t start.
All of the information for this on/off switch replacement video is applicable to the following brands:
Homelite, Ryobi
Tools used: T25 Torx screwdriver, needle-nose pliers, flat head screwdriver
All of the information for this on/off switch replacement video is applicable to the following brands:
Homelite, Ryobi
Tools used: T25 Torx screwdriver, needle-nose pliers, flat head screwdriver
Step-By-Step Instructions
1
Before you replace the on-off switch on your chainsaw first make sure the engine has cooled and that the switch is in the “off” position.
2
Now use a t-25 torx bit screwdriver to unthread the screws securing the top cover.
3
Pull the cover off – this may require some effort.
4
Next, disconnect the wires from the old on-off switch.
5
Use a small flathead screwdriver to depress the retaining tabs to release the old switch.
6
Install the new on-off switch by inserting it into the mounting bracket until it snaps into place.
7
Connect the wires to the appropriate terminals on the new switch.
8
Realign the top cover and replace the screws to secure.
9
Turn the new switch to the “on” position and your chainsaw should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com