Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Top Load Washer Replace Control/Display Board #EBR62267115
LG Top Load Washer Replace Control/Display Board #EBR62267115
Skill Level
Total Parts Cost
$284.00Estimated Savings
$112.5003:41
- Description
This video provides step-by-step instructions for replacing the user control and display board on LG top-load washing machines. The most common reason for replacing the board is if none of the buttons or knobs on the washer are responding, and the board is getting power.
All of the information in this control and display board replacement video is applicable to the following brands: LG
Tools used: Phillips head screwdriver, small flat-head screwdriver
All of the information in this control and display board replacement video is applicable to the following brands: LG
Tools used: Phillips head screwdriver, small flat-head screwdriver
Step By Step Instructions
1
Before you replace user control & display board in your washer unplug the power cord.
2
Now use a phillips-head screwdriver to unthread the screws securing the rear control panel.
3
Lift the panel up to remove.
4
Next, detach the control housing and remove the screw securing the control assembly cover.
5
Use a small flat-head screwdriver to help release the cover and set the cover aside.
6
Disconnect the display board wire connecters from the main control board.
7
Next, remove the screws securing the control assembly.
8
Pull the assembly away from the control housing and use the small flat-head screwdriver to carefully separate the main control board from the old display board.
9
Prepare the new user control & display board for installation by transferring the selector knob from the old board to the new one.
10
Now snap the new board into place on the main control board.
11
Align the control assembly in the housing and replace the screws to secure.
12
Connect the new display board wire connecters to the terminals on the main control board.
13
Snap on the cover and replace the mounting screw.
14
Reposition the control housing.
15
Slide the rear control panel into place and secure it with the screws.
16
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the user control and display board on LG top-load washing machines. The most common reason for replacing the board is if none of the buttons or knobs on the washer are responding, and the board is getting power.
All of the information in this control and display board replacement video is applicable to the following brands: LG
Tools used: Phillips head screwdriver, small flat-head screwdriver
All of the information in this control and display board replacement video is applicable to the following brands: LG
Tools used: Phillips head screwdriver, small flat-head screwdriver
Step-By-Step Instructions
1
Before you replace user control & display board in your washer unplug the power cord.
2
Now use a phillips-head screwdriver to unthread the screws securing the rear control panel.
3
Lift the panel up to remove.
4
Next, detach the control housing and remove the screw securing the control assembly cover.
5
Use a small flat-head screwdriver to help release the cover and set the cover aside.
6
Disconnect the display board wire connecters from the main control board.
7
Next, remove the screws securing the control assembly.
8
Pull the assembly away from the control housing and use the small flat-head screwdriver to carefully separate the main control board from the old display board.
9
Prepare the new user control & display board for installation by transferring the selector knob from the old board to the new one.
10
Now snap the new board into place on the main control board.
11
Align the control assembly in the housing and replace the screws to secure.
12
Connect the new display board wire connecters to the terminals on the main control board.
13
Snap on the cover and replace the mounting screw.
14
Reposition the control housing.
15
Slide the rear control panel into place and secure it with the screws.
16
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Cleaner
$7.62
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com