Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Top-Load Washer Power Cord Replacement #EAD40521444
LG Top-Load Washer Power Cord Replacement #EAD40521444
Skill Level
Total Parts Cost
$101.53Estimated Savings
$112.5002:32
- Description
This video provides step-by-step instructions for replacing the power cord on LG top-load washing machines. The most common reason for replacing the power cord is when the washer won’t start and testing proves it to be defective; the power cord is rarely at fault.
All of the information in this power cord replacement video is applicable to the following brands: LG, Kenmore
Tools used: Phillips head screwdriver
All of the information in this power cord replacement video is applicable to the following brands: LG, Kenmore
Tools used: Phillips head screwdriver
Step By Step Instructions
1
Before you replace the power cord on your washer unplug the old cord from the wall outlet.
2
Now use a phillips-head screwdriver to unthread the screws securing the rear control panel.
3
Lift the panel up to remove.
4
Detach the control housing.
5
Next, remove the mounting screws securing the noise filter.
6
Disconnect the power cord wire connecter from the noise filter board and unthread the screw to release the grounding wire.
7
You can now fully remove the old power cord.
8
Install the new power cord by inserting it into the control base.
9
Secure the grounding wire with the screw and connect the new wire connecter to the noise filter board.
10
Reposition the noise filter and replace the mounting screws to secure.
11
Reposition the control housing.
12
Slide the rear control panel into place and secure it with the screws.
13
With the repair completed plug the new power cord in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the power cord on LG top-load washing machines. The most common reason for replacing the power cord is when the washer won’t start and testing proves it to be defective; the power cord is rarely at fault.
All of the information in this power cord replacement video is applicable to the following brands: LG, Kenmore
Tools used: Phillips head screwdriver
All of the information in this power cord replacement video is applicable to the following brands: LG, Kenmore
Tools used: Phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the power cord on your washer unplug the old cord from the wall outlet.
2
Now use a phillips-head screwdriver to unthread the screws securing the rear control panel.
3
Lift the panel up to remove.
4
Detach the control housing.
5
Next, remove the mounting screws securing the noise filter.
6
Disconnect the power cord wire connecter from the noise filter board and unthread the screw to release the grounding wire.
7
You can now fully remove the old power cord.
8
Install the new power cord by inserting it into the control base.
9
Secure the grounding wire with the screw and connect the new wire connecter to the noise filter board.
10
Reposition the noise filter and replace the mounting screws to secure.
11
Reposition the control housing.
12
Slide the rear control panel into place and secure it with the screws.
13
With the repair completed plug the new power cord in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com