Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Top Load Washer Stator Assembly Replacement #4417EA1002K
LG Top Load Washer Stator Assembly Replacement #4417EA1002K
Skill Level
Total Parts Cost
$311.49Estimated Savings
$112.5003:13
- Description
This video provides step-by-step instructions for replacing the stator assembly on LG and Kenmore top-load washing machines. The most common reason for replacing the stator is when it burns out, causing the washer to not spin or agitate. This is not common.
All of the information in this stator replacement video is applicable to the following brands: LG, Kenmore
Tools used: adjustable wrench, hammer, 10mm socket, small flat-head screwdriver
All of the information in this stator replacement video is applicable to the following brands: LG, Kenmore
Tools used: adjustable wrench, hammer, 10mm socket, small flat-head screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws securing the rear panel.
3
Push the panel up to remove.
4
Next, rotate the rotor clockwise and, using a 17 mm socket, apply a sharp strong motion to loosen the mounting bolt.
5
Remove the bolt and washer.
6
Now pull the rotor off the tub shaft. Be aware this may require some effort.
7
Remove the screws securing the stator wire retainers and bracket as well as the grounding screw.
8
Then remove the bolts securing the stator
9
Pull the stator off of the tub.
10
Disconnect the stator wire harness along with the motor sensor wire harness.
11
Install the new stator by first snapping the motor sensor and stator wire harnesses into place.
12
Now position the new stator on the tub and secure it with the bolts.
13
Secure the grounding wire then secure the retainers and wire bracket with the screws.
14
Align the rotor.
15
Apply some thread locking fluid to the rotor bolt then insert the bolt and washer and thread to secure.
16
Rotate the rotor counter-clockwise and apply a sharp strong motion to the socket wrench to tighten the bolt.
17
Slide the rear panel into position and secure it with the screws.
18
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the stator assembly on LG and Kenmore top-load washing machines. The most common reason for replacing the stator is when it burns out, causing the washer to not spin or agitate. This is not common.
All of the information in this stator replacement video is applicable to the following brands: LG, Kenmore
Tools used: adjustable wrench, hammer, 10mm socket, small flat-head screwdriver
All of the information in this stator replacement video is applicable to the following brands: LG, Kenmore
Tools used: adjustable wrench, hammer, 10mm socket, small flat-head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws securing the rear panel.
3
Push the panel up to remove.
4
Next, rotate the rotor clockwise and, using a 17 mm socket, apply a sharp strong motion to loosen the mounting bolt.
5
Remove the bolt and washer.
6
Now pull the rotor off the tub shaft. Be aware this may require some effort.
7
Remove the screws securing the stator wire retainers and bracket as well as the grounding screw.
8
Then remove the bolts securing the stator
9
Pull the stator off of the tub.
10
Disconnect the stator wire harness along with the motor sensor wire harness.
11
Install the new stator by first snapping the motor sensor and stator wire harnesses into place.
12
Now position the new stator on the tub and secure it with the bolts.
13
Secure the grounding wire then secure the retainers and wire bracket with the screws.
14
Align the rotor.
15
Apply some thread locking fluid to the rotor bolt then insert the bolt and washer and thread to secure.
16
Rotate the rotor counter-clockwise and apply a sharp strong motion to the socket wrench to tighten the bolt.
17
Slide the rear panel into position and secure it with the screws.
18
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com