Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Top Load Washer Thermistor Replacement #6322FR2046G
LG Top Load Washer Thermistor Replacement #6322FR2046G
Skill Level
Total Parts Cost
$39.94Estimated Savings
$112.5002:21
- Description
This video provides step-by-step repair instructions for replacing the thermistor on an LG top-loading washing machine. The most common reason for replacing the thermistor is when the washer isn’t heating water properly.
All of the information for this thermistor replacement video is applicable to the following brands:
LG, Kenmore
Tools needed: none
All of the information for this thermistor replacement video is applicable to the following brands:
LG, Kenmore
Tools needed: none
Step By Step Instructions
1
Before you replace the thermistor in your washer unplug the power cord
2
Shut off the water supply.
3
Next, remove the hot and cold water supply lines from the inlet valve – be prepared for some water to spill out.
4
Carefully tip the washer back so it rests on the rear panel.
5
Now disconnect the thermistor wire connecter.
6
Next, remove the screws securing the thermistor to the outer tub.
7
Untwist the retaining wire and remove the old part.
8
Install the new thermistor by aligning it on the outer tub.
9
Replace the screws to secure.
10
Connect the wire connecter to the new thermistor and secure with the retaining wire.
11
Return the washer to its upright position.
12
Reattach the hot and cold water supply lines to the inlet valve.
13
With the repair completed turn the water supply back on plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the thermistor on an LG top-loading washing machine. The most common reason for replacing the thermistor is when the washer isn’t heating water properly.
All of the information for this thermistor replacement video is applicable to the following brands:
LG, Kenmore
Tools needed: none
All of the information for this thermistor replacement video is applicable to the following brands:
LG, Kenmore
Tools needed: none
Step-By-Step Instructions
1
Before you replace the thermistor in your washer unplug the power cord
2
Shut off the water supply.
3
Next, remove the hot and cold water supply lines from the inlet valve – be prepared for some water to spill out.
4
Carefully tip the washer back so it rests on the rear panel.
5
Now disconnect the thermistor wire connecter.
6
Next, remove the screws securing the thermistor to the outer tub.
7
Untwist the retaining wire and remove the old part.
8
Install the new thermistor by aligning it on the outer tub.
9
Replace the screws to secure.
10
Connect the wire connecter to the new thermistor and secure with the retaining wire.
11
Return the washer to its upright position.
12
Reattach the hot and cold water supply lines to the inlet valve.
13
With the repair completed turn the water supply back on plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com