Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Top Load Washer Shift Actuator Replacement #4323EA2001C
LG Top Load Washer Shift Actuator Replacement #4323EA2001C
Skill Level
Total Parts Cost
$43.50Estimated Savings
$112.5003:42
- Description
This video provides step-by-step instructions for replacing the shift actuator on LG and Kenmore top-load washing machines. The most common reasons for replacing the shift actuator are when the washer makes noise or won’t spin.
All of the information for this shift actuator replacement video is applicable to the following brands: LG, Kenmore
Tools used: adjustable wrench, hammer, 10mm socket, 5/16” socket
All of the information for this shift actuator replacement video is applicable to the following brands: LG, Kenmore
Tools used: adjustable wrench, hammer, 10mm socket, 5/16” socket
Step By Step Instructions
1
Before you replace the shift actuator & coupling in your washer unplug the power cord
2
Shut off the water supply.
3
Next, remove the hot and cold water supply lines from the inlet valve – be prepared for some water to spill out.
4
Carefully tip the washer back so it rests on the rear panel.
5
Now use an adjustable wrench and strike it with a hammer to help unthread the rotor mounting nut.
6
With the nut and washer removed, carefully pull off the rotor assembly.
7
Now use a 10mm socket to remove the mounting bolts securing the stator.
8
Carefully remove the stator and use a 5/16th inch socket to remove the screws securing the shift actuator.
9
With the screws removed, pull the old actuator and coupling off.
10
Prepare the new shift actuator and coupling for installation by applying some grease to the coupling and inserting the coupling into the actuator.
11
Now align the large end of the spring in the groove on the coupling then insert the actuator post into the clutch housing as you align the assembly.
12
Replace the screws to secure.
13
Realign the stator on the clutch & bearing housing and replace the mounting bolts to secure.
14
Replace the rotor assembly by aligning it on the shaft.
15
Replace the washer and rethread the mounting nut.
16
Torque the nut to 88 foot pounds.
17
Return the washer to its upright position.
18
Reattach the hot and cold water supply lines to the inlet valve.
19
With the repair completed turn the water supply back on plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the shift actuator on LG and Kenmore top-load washing machines. The most common reasons for replacing the shift actuator are when the washer makes noise or won’t spin.
All of the information for this shift actuator replacement video is applicable to the following brands: LG, Kenmore
Tools used: adjustable wrench, hammer, 10mm socket, 5/16” socket
All of the information for this shift actuator replacement video is applicable to the following brands: LG, Kenmore
Tools used: adjustable wrench, hammer, 10mm socket, 5/16” socket
Step-By-Step Instructions
1
Before you replace the shift actuator & coupling in your washer unplug the power cord
2
Shut off the water supply.
3
Next, remove the hot and cold water supply lines from the inlet valve – be prepared for some water to spill out.
4
Carefully tip the washer back so it rests on the rear panel.
5
Now use an adjustable wrench and strike it with a hammer to help unthread the rotor mounting nut.
6
With the nut and washer removed, carefully pull off the rotor assembly.
7
Now use a 10mm socket to remove the mounting bolts securing the stator.
8
Carefully remove the stator and use a 5/16th inch socket to remove the screws securing the shift actuator.
9
With the screws removed, pull the old actuator and coupling off.
10
Prepare the new shift actuator and coupling for installation by applying some grease to the coupling and inserting the coupling into the actuator.
11
Now align the large end of the spring in the groove on the coupling then insert the actuator post into the clutch housing as you align the assembly.
12
Replace the screws to secure.
13
Realign the stator on the clutch & bearing housing and replace the mounting bolts to secure.
14
Replace the rotor assembly by aligning it on the shaft.
15
Replace the washer and rethread the mounting nut.
16
Torque the nut to 88 foot pounds.
17
Return the washer to its upright position.
18
Reattach the hot and cold water supply lines to the inlet valve.
19
With the repair completed turn the water supply back on plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Parts Needed
Shift Actuator
$43.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com