Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Lawn Mower Mulch Cover Replacement #987-02516A
Craftsman Lawn Mower Mulch Cover Replacement #987-02516A
Skill Level
Total Parts Cost
$30.84Estimated Savings
$112.5001:42
- Description
This video provides step-by-step instructions for replacing the mulch cover on Craftsman lawn mowers. The most common reason for replacing the mulch cover is if it is damaged.
All the information in this mulch cover replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Yard-Man, Huskee, Yard Machines, MasterCut, Murray
Tools used: 3/8” nut driver
All the information in this mulch cover replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Yard-Man, Huskee, Yard Machines, MasterCut, Murray
Tools used: 3/8” nut driver
Step By Step Instructions
1
Before you replace the mulch cover on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend performing this procedure with little or no fuel in the tank.
4
Now carefully set the lawn mower on its side.
5
Use a 3/8th inch socket or nut driver to remove the mounting bolt securing the mulch cover.
6
With the bolt removed, pull off the old cover.
7
Install the new mulch cover by aligning it on the mower deck then thread and tighten the bolt to secure.
8
Return the mower to its upright position.
9
With the repair completed reattach the wire and boot to the spark plug refill the fuel tank and your lawn mower should be ready for use.
Description
This video provides step-by-step instructions for replacing the mulch cover on Craftsman lawn mowers. The most common reason for replacing the mulch cover is if it is damaged.
All the information in this mulch cover replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Yard-Man, Huskee, Yard Machines, MasterCut, Murray
Tools used: 3/8” nut driver
All the information in this mulch cover replacement video is applicable to the following brands: MTD, Craftsman, Troy-Bilt, Yard-Man, Huskee, Yard Machines, MasterCut, Murray
Tools used: 3/8” nut driver
Step-By-Step Instructions
1
Before you replace the mulch cover on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We recommend performing this procedure with little or no fuel in the tank.
4
Now carefully set the lawn mower on its side.
5
Use a 3/8th inch socket or nut driver to remove the mounting bolt securing the mulch cover.
6
With the bolt removed, pull off the old cover.
7
Install the new mulch cover by aligning it on the mower deck then thread and tighten the bolt to secure.
8
Return the mower to its upright position.
9
With the repair completed reattach the wire and boot to the spark plug refill the fuel tank and your lawn mower should be ready for use.
Applicable Product Model
Parts Needed
Mulch Plug
$30.84
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com