Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Lawn Mower Rear Wheel Replacement #634-05062
Craftsman Lawn Mower Rear Wheel Replacement #634-05062
Skill Level
Total Parts Cost
$42.74Estimated Savings
$112.5001:47
- Description
This video provides step-by-step instructions for replacing a rear wheel on Craftsman lawn mowers. The most common reason for replacing a wheel is if does not turn, is worn out, or is damaged, which can cause the mower to not cut evenly.
All the information in this wheel replacement video is applicable to the following brands: MTD, Craftsman, Yard-Man
Tools used: flat-head screwdriver, 9/16” nut driver
All the information in this wheel replacement video is applicable to the following brands: MTD, Craftsman, Yard-Man
Tools used: flat-head screwdriver, 9/16” nut driver
Step By Step Instructions
1
Before you replace a rear wheel on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Now lift up the rear of the mower and support it.
4
Use a flat-head screwdriver to help pry off the wheel cover from the wheel you’re replacing.
5
Now use a 9/16th inch socket to help loosen the mounting nut then unthread the nut and remove the old wheel.
6
Install the new rear wheel by sliding it onto the axle.
7
Rethread the mounting nut and tighten.
8
Align the wheel cover and snap it into place.
9
Remove the support.
10
With the repair completed reattach the wire and boot to the spark plug and your lawn mower should be ready for use.
Description
This video provides step-by-step instructions for replacing a rear wheel on Craftsman lawn mowers. The most common reason for replacing a wheel is if does not turn, is worn out, or is damaged, which can cause the mower to not cut evenly.
All the information in this wheel replacement video is applicable to the following brands: MTD, Craftsman, Yard-Man
Tools used: flat-head screwdriver, 9/16” nut driver
All the information in this wheel replacement video is applicable to the following brands: MTD, Craftsman, Yard-Man
Tools used: flat-head screwdriver, 9/16” nut driver
Step-By-Step Instructions
1
Before you replace a rear wheel on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Now lift up the rear of the mower and support it.
4
Use a flat-head screwdriver to help pry off the wheel cover from the wheel you’re replacing.
5
Now use a 9/16th inch socket to help loosen the mounting nut then unthread the nut and remove the old wheel.
6
Install the new rear wheel by sliding it onto the axle.
7
Rethread the mounting nut and tighten.
8
Align the wheel cover and snap it into place.
9
Remove the support.
10
With the repair completed reattach the wire and boot to the spark plug and your lawn mower should be ready for use.
Applicable Product Model
Parts Needed
Wheel Assembly
$42.74
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com