Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Leaf Blower Fuel Return Line Replacement #13201049730
Echo Leaf Blower Fuel Return Line Replacement #13201049730
Skill Level
Total Parts Cost
$2.93Estimated Savings
$112.5002:34
- Description
This video provides step-by-step repair instructions for replacing the fuel return line on an Echo leaf blower. The most common reason for replacing the fuel line is when it is leaking.
All of the information for this fuel return line replacement video is applicable to the following brands:
Echo, Shindaiwa
Tools needed: large flat-head screwdriver
All of the information for this fuel return line replacement video is applicable to the following brands:
Echo, Shindaiwa
Tools needed: large flat-head screwdriver
Step By Step Instructions
1
Before you replace the fuel return line in your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Note the orientation of the fuel lines attached to the carburetor then detach them.
4
If necessary, pull the vent line free.
5
Now use a large flat-head screwdriver to help pry the grommet out of the fuel tank and pull the fuel line assembly free.
6
If still intact, remove the old return line from the grommet.
7
To make it easier to install the new fuel return line apply a small amount of liquid dish soap or rinse aid.
8
Then insert the line through the grommet.
9
Now insert the fuel filter and line into the tank.
10
Note the orientation of the fuel lines then press the grommet into place.
11
Attach the fuel lines to the appropriate ports on the carburetor.
12
Position the vent line in the blower housing.
13
With the repair complete turn the on-off switch to the “on” position, refill the fuel tank and your leaf blower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the fuel return line on an Echo leaf blower. The most common reason for replacing the fuel line is when it is leaking.
All of the information for this fuel return line replacement video is applicable to the following brands:
Echo, Shindaiwa
Tools needed: large flat-head screwdriver
All of the information for this fuel return line replacement video is applicable to the following brands:
Echo, Shindaiwa
Tools needed: large flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the fuel return line in your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Note the orientation of the fuel lines attached to the carburetor then detach them.
4
If necessary, pull the vent line free.
5
Now use a large flat-head screwdriver to help pry the grommet out of the fuel tank and pull the fuel line assembly free.
6
If still intact, remove the old return line from the grommet.
7
To make it easier to install the new fuel return line apply a small amount of liquid dish soap or rinse aid.
8
Then insert the line through the grommet.
9
Now insert the fuel filter and line into the tank.
10
Note the orientation of the fuel lines then press the grommet into place.
11
Attach the fuel lines to the appropriate ports on the carburetor.
12
Position the vent line in the blower housing.
13
With the repair complete turn the on-off switch to the “on” position, refill the fuel tank and your leaf blower should be ready for use.
Applicable Product Model
Parts Needed
Fuel Line
$2.93
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com