Find the right part faster
Multiple models matched. Select your model to confirm fit.

Champion Spark Plug (RC12YC). The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

Small engine primer bulb. The primer bulb draws additional fuel into the carburetor to help start the engine.

Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.

Primer bulb. The primer bulb draws fuel into the carburetor to make the engine easier to start.

Fuel bowl gasket

Pawl asm ac5

Briggs & Stratton Spark Plug (RJ19LM). If the engine does not start or runs poorly then the spark plug may be defective and will need replacement.

Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.

MTD Spark Plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

Fuel line kit. Both large & small diameter fuel lines included. The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system. If the fuel line is leaking, replace it.

Fuel Line (Small)- 9/64 (.140) inch OD - (.080) inch ID, W/ Installation instructions.

Bag, blower "vac-n-sac"

Air filter. If the air filter is clogged or dirty, the engine may not start or may run rough.

Small engine NGK spark plug (BPR6ES). If the engine does not start, the spark plug may be defective. The spark plug should be replaced periodically during regular maintenance.

Lock nut with nylon insert.
Gas leaf blowers fail in predictable ways, and most repairs come down to a handful of parts. The carburetor is the #1 failure — ethanol-damaged fuel clogs the jets and needle valve, leaving you with a blower that won't start or runs rough. Recoil starters jam or snap, fuel lines crack from age, and spark plugs foul. Air filters clog from dust. On the business end, impeller blades crack or break, killing airflow. The good news: these are all straightforward fixes with OEM parts from Repair Clinic.
Enter your leaf blower model number to find the exact parts you need. Whether you are repairing a compatible model, we carry OEM carburetors, starters, fuel system parts, and impeller assemblies in stock.
The carburetor is almost always the culprit. Ethanol in modern gasoline gums up the carburetor's tiny jets and needle valve, preventing fuel from reaching the engine. Old fuel left sitting in the tank hardens and clogs everything. A carburetor rebuild kit (gasket, needle, and jet set) is often the first fix; if that doesn't work, a full OEM carburetor replacement for your model is the answer. Always use fresh fuel and consider a fuel stabilizer for off-season storage.
The model number is printed on a sticker or stamped into the plastic housing, usually near the air filter or on the back of the engine. It looks like "BR600" () or "BG55" () or a longer alphanumeric like "WG546" (). Write it down — you'll need it to order the correct carburetor, impeller, or fuel line for your blower. Every brand codes differently, so the model number is your key to exact-fit parts.
Gas leaf blower carburetors are engine-specific. A BR600 carburetor won't fit a 125B, and carburetors rarely seal correctly or deliver the right fuel-to-air ratio. Always use the OEM carburetor for your model number. We carry Zama, Walbro, and other OEM carb suppliers — enter your model to get the exact match.
At least once a year before the spring blowing season, or every 50 to 100 hours of use. A fouled plug (covered in carbon) won't spark, and a plug gapped too wide won't fire. Keep the correct OEM spark plug type in your toolbox. Most common types are Champion RJ19LM or NGK BR2LM — but verify your manual or model number.


Ensure your leaf blower stays in peak condition with genuine replacement parts. Finding the right part is reliable using the model or part number lookup on our site. Order online with confidence, knowing that parts ship the same day for your convenience. Whether you need ignition parts, carburetor parts, or spark plugs, we make it easy to find and order leaf blower parts online. With fast shipping and expert repair resources, your leaf blower will be back in action in no time. For further assistance, visit our leaf blower repair help page for detailed repair guides and solutions. Browse our selection of leaf blower parts to ensure a proper fit.
The fastest way to the right leaf blower parts is your model number, usually printed on a label near the air filter or on the back of the engine housing. Check the blower's plastic housing and look for a model code, not the serial number. Once you have it, enter it in the search bar to narrow the catalog to every part that fits your specific blower model. This works across engine, fuel, ignition, housing, and other associated parts, so you do not have to guess which listing applies. A model search gives you a faster, more accurate match and helps avoid ordering parts for the wrong unit.

Repair Clinic's online repair library gives you the tools to diagnose and fix your Leaf Blower without a service call. Common-symptom articles cover the most likely causes, part testing videos confirm the failed component, and step-by-step written guides walk you through the installation. Use the model number lookup to confirm the exact OEM part, and exploded-view diagrams and wiring illustrations support the more involved jobs.

Find essential techniques for safe and efficient yard cleanup using a leaf blower from choosing the right model and adjusting the nozzle to mastering sweeping motions for leaf and debris removal.

Identify five common causes of a rough running gas leaf blower such as a clogged carburetor fuel or air filter worn spark plug or blocked spark arrestor and how to address each one.

Uncover five likely causes that make a gas-powered leaf blower start and then stall—such as a clogged spark arrestor, restricted carburetor, dirty filters, or obstructed fuel cap—and how to resolve each one.