Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Leaf Blower Intake Manifold Gasket Replacement V103000400
Echo Leaf Blower Intake Manifold Gasket Replacement V103000400
Skill Level
Total Parts Cost
$2.09Estimated Savings
$112.5001:42
- Description
This video provides step-by-step instructions for replacing the intake manifold gasket on Echo leaf blowers. The most common reason for replacing the gasket is when the engine runs poorly.
All of the information in this gasket replacement video is applicable to the following brands: Echo
Tools used: T25 Torx bit screwdriver
All of the information in this gasket replacement video is applicable to the following brands: Echo
Tools used: T25 Torx bit screwdriver
Step By Step Instructions
1
Before you replace the intake manifold gasket on your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
Now loosen the mounting screw to release the air filter cover and pull out the air filter.
3
Use a t-25 torx bit screwdriver to unthread the carburetor mounting bolts.
4
Separate the air filter housing and carburetor from the spacer and remove the old intake manifold gasket, if still intact.
5
Install the new intake manifold gasket by sliding it onto the carburetor mounting bolts.
6
Now thread the bolts into the carburetor spacer and tighten to secure the assembly.
7
Realign the air filter on the filter housing.
8
Reposition the cover and tighten the screw to secure.
Description
This video provides step-by-step instructions for replacing the intake manifold gasket on Echo leaf blowers. The most common reason for replacing the gasket is when the engine runs poorly.
All of the information in this gasket replacement video is applicable to the following brands: Echo
Tools used: T25 Torx bit screwdriver
All of the information in this gasket replacement video is applicable to the following brands: Echo
Tools used: T25 Torx bit screwdriver
Step-By-Step Instructions
1
Before you replace the intake manifold gasket on your leaf blower make sure the engine has cooled and the on-off switch is in the “off” position.
2
Now loosen the mounting screw to release the air filter cover and pull out the air filter.
3
Use a t-25 torx bit screwdriver to unthread the carburetor mounting bolts.
4
Separate the air filter housing and carburetor from the spacer and remove the old intake manifold gasket, if still intact.
5
Install the new intake manifold gasket by sliding it onto the carburetor mounting bolts.
6
Now thread the bolts into the carburetor spacer and tighten to secure the assembly.
7
Realign the air filter on the filter housing.
8
Reposition the cover and tighten the screw to secure.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com