Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Gas Range/Oven Control Board Replacement #8523666
Kenmore Gas Range/Oven Control Board Replacement #8523666
Skill Level
Total Parts Cost
$219.60Estimated Savings
$112.5001:25
- Description
This video provides step-by-step repair instructions for replacing the control board on a Kenmore gas range. The most common reason for replacing the control board is when the oven won’t heat.
All of the information for this oven control board replacement video is applicable to the following brands:
Kenmore
Tools needed: Phillips screwdriver
All of the information for this oven control board replacement video is applicable to the following brands:
Kenmore
Tools needed: Phillips screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the top rear panel.
3
Next, remove the ribbon wire from the connector attached to the clock control board.
4
Using pliers, twist the retaining tabs to release the old clock control board from the control panel.
5
Install the new clock control board by positioning it against the control panel then secure it with the tabs.
6
Now transfer the wires from the old component to the new one.
7
Reattach the ribbon wire to the new board by inserting it into the connector, then snap the connector into place.
8
Replace the rear panel and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the control board on a Kenmore gas range. The most common reason for replacing the control board is when the oven won’t heat.
All of the information for this oven control board replacement video is applicable to the following brands:
Kenmore
Tools needed: Phillips screwdriver
All of the information for this oven control board replacement video is applicable to the following brands:
Kenmore
Tools needed: Phillips screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the top rear panel.
3
Next, remove the ribbon wire from the connector attached to the clock control board.
4
Using pliers, twist the retaining tabs to release the old clock control board from the control panel.
5
Install the new clock control board by positioning it against the control panel then secure it with the tabs.
6
Now transfer the wires from the old component to the new one.
7
Reattach the ribbon wire to the new board by inserting it into the connector, then snap the connector into place.
8
Replace the rear panel and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com