Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Gas Oven/Range Igniter Replacement #8190618
Kenmore Gas Oven/Range Igniter Replacement #8190618
Skill Level
Total Parts Cost
$151.79Estimated Savings
$112.5001:45
- Description
This video provides step-by-step instructions on replacing the igniter on Kenmore gas ranges. The most common reasons to replace the igniter are if the oven doesn’t bake evenly, won’t heat, or won’t turn on.
All the information in this electrode and burner replacement video is applicable to the following brands: Whirlpool, Kenmore, Roper, Estate, Crosley
Tools used: Phillips screwdriver, 14” nut driver
All the information in this electrode and burner replacement video is applicable to the following brands: Whirlpool, Kenmore, Roper, Estate, Crosley
Tools used: Phillips screwdriver, 14” nut driver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
First, remove the oven racks.
3
Next, loosen the screws at the back of the oven floor panel and remove the panel.
4
Now, remove the mounting screws securing the burner shield and detach it.
5
Your next step is to remove the mounting screws to release the old bake spark electrode and burner.
6
Detach the wire connector.
7
Install the new bake spark electrode and burner by first attaching the wire connector then position and secure with the mounting screws.
8
Reinstall the burner shield and screws.
9
Replace the floor panel and tighten the screws.
10
Replace the oven racks and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions on replacing the igniter on Kenmore gas ranges. The most common reasons to replace the igniter are if the oven doesn’t bake evenly, won’t heat, or won’t turn on.
All the information in this electrode and burner replacement video is applicable to the following brands: Whirlpool, Kenmore, Roper, Estate, Crosley
Tools used: Phillips screwdriver, 14” nut driver
All the information in this electrode and burner replacement video is applicable to the following brands: Whirlpool, Kenmore, Roper, Estate, Crosley
Tools used: Phillips screwdriver, 14” nut driver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
First, remove the oven racks.
3
Next, loosen the screws at the back of the oven floor panel and remove the panel.
4
Now, remove the mounting screws securing the burner shield and detach it.
5
Your next step is to remove the mounting screws to release the old bake spark electrode and burner.
6
Detach the wire connector.
7
Install the new bake spark electrode and burner by first attaching the wire connector then position and secure with the mounting screws.
8
Reinstall the burner shield and screws.
9
Replace the floor panel and tighten the screws.
10
Replace the oven racks and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com