Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Drain Hose Extension Replacement #WD24X10062
GE Dishwasher Drain Hose Extension Replacement #WD24X10062
Skill Level
Total Parts Cost
$23.96Estimated Savings
$112.5005:56
- Description
This video provides step-by-step instructions for replacing the drain hose extension on GE dishwashers. The most common reason for replacing the drain hose extension is if it is leaking; you may also wish to remove it to get at the drain hose to unclog it if it is clogged but not damaged, causing the dishwasher to not drain.
All of the information in this drain hose extension replacement video is applicable to the following brands: GE
Tools used: 1/4” socket or nut driver, channel-lock pliers, 5/16” socket or nut driver
All of the information in this drain hose extension replacement video is applicable to the following brands: GE
Tools used: 1/4” socket or nut driver, channel-lock pliers, 5/16” socket or nut driver
Step By Step Instructions
1
To replace the drain hose extension on your dishwasher, you will need to uninstall the appliance first. To do this, turn off the power to your dishwasher
2
Shut off the water supply valve.
3
Use a quarter-inch socket or nut driver to remove the screws securing the lower access panel.
4
Remove the panel along with any insulation.
5
Use channel –lock pliers to help unthread the water supply line fitting from the inlet valve be prepared for some water to spill.
6
Next, use a 5/16th inch socket or nut driver to unthread the screw securing the junction box cover. Then pull the cover off.
7
Note the location of the wires then untwist the wire nuts to disconnect the wires.
8
Unthread the strain relief nut and detach the strain relief from the junction box.
9
Next, disconnect the drain hose from the sink or garbage disposer and feed it through the cabinet.
10
Open the dishwasher door and remove the mounting bracket screws.
11
To move the dishwasher, you may need to adjust the legs to lower the appliance.
12
Now, to avoid damage, very carefully pull the dishwasher away from the cabinet.
13
Use the 5/16th inch socket or nut driver to unthread the screw to loosen the retaining clamp then pull the old drain hose extension free of the high loop hose.
14
Install the new drain hose extension by attaching it to the high loop hose then reposition the retaining clamp and tighten the screw to secure.
15
Feed the end of the new hose through the cabinet wall then gently slide the dishwasher back into the cabinet.
16
Adjust the leveling legs if necessary.
17
Replace the screws to secure the mounting brackets to the cabinet or countertop.
18
Feed the drain hose through the cabinet and connect it to the sink drain or disposer.
19
Make sure the hose is elevated above the connection point.
20
Fully position the wire strain relief in the junction box and secure the strain relief nut.
21
Connect the wires using the wire nuts.
22
Align the cover and replace the screw to secure.
23
Reconnect the water supply line to the inlet valve.
24
Replace any insulation then reposition the lower access panel.
25
Secure it with the screws.
26
With the repair completed, turn the water supply back on as well as the power and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the drain hose extension on GE dishwashers. The most common reason for replacing the drain hose extension is if it is leaking; you may also wish to remove it to get at the drain hose to unclog it if it is clogged but not damaged, causing the dishwasher to not drain.
All of the information in this drain hose extension replacement video is applicable to the following brands: GE
Tools used: 1/4” socket or nut driver, channel-lock pliers, 5/16” socket or nut driver
All of the information in this drain hose extension replacement video is applicable to the following brands: GE
Tools used: 1/4” socket or nut driver, channel-lock pliers, 5/16” socket or nut driver
Step-By-Step Instructions
1
To replace the drain hose extension on your dishwasher, you will need to uninstall the appliance first. To do this, turn off the power to your dishwasher
2
Shut off the water supply valve.
3
Use a quarter-inch socket or nut driver to remove the screws securing the lower access panel.
4
Remove the panel along with any insulation.
5
Use channel –lock pliers to help unthread the water supply line fitting from the inlet valve be prepared for some water to spill.
6
Next, use a 5/16th inch socket or nut driver to unthread the screw securing the junction box cover. Then pull the cover off.
7
Note the location of the wires then untwist the wire nuts to disconnect the wires.
8
Unthread the strain relief nut and detach the strain relief from the junction box.
9
Next, disconnect the drain hose from the sink or garbage disposer and feed it through the cabinet.
10
Open the dishwasher door and remove the mounting bracket screws.
11
To move the dishwasher, you may need to adjust the legs to lower the appliance.
12
Now, to avoid damage, very carefully pull the dishwasher away from the cabinet.
13
Use the 5/16th inch socket or nut driver to unthread the screw to loosen the retaining clamp then pull the old drain hose extension free of the high loop hose.
14
Install the new drain hose extension by attaching it to the high loop hose then reposition the retaining clamp and tighten the screw to secure.
15
Feed the end of the new hose through the cabinet wall then gently slide the dishwasher back into the cabinet.
16
Adjust the leveling legs if necessary.
17
Replace the screws to secure the mounting brackets to the cabinet or countertop.
18
Feed the drain hose through the cabinet and connect it to the sink drain or disposer.
19
Make sure the hose is elevated above the connection point.
20
Fully position the wire strain relief in the junction box and secure the strain relief nut.
21
Connect the wires using the wire nuts.
22
Align the cover and replace the screw to secure.
23
Reconnect the water supply line to the inlet valve.
24
Replace any insulation then reposition the lower access panel.
25
Secure it with the screws.
26
With the repair completed, turn the water supply back on as well as the power and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com