Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Door Gasket Replacement #WD08X20674
GE Dishwasher Door Gasket Replacement #WD08X20674
Skill Level
Total Parts Cost
$24.74Estimated Savings
$112.5001:20
- Description
This video provides step-by-step instructions for replacing the door gasket on GE dishwashers. The most common reason for replacing the gasket is when water is leaking from the dishwasher door.
All of the information in this gasket replacement video is applicable to the following brands: GE
Tools used: none
All of the information in this gasket replacement video is applicable to the following brands: GE
Tools used: none
Step By Step Instructions
1
To replace the door gasket in your dishwasher open the dishwasher door and, starting at one end, pull the old gasket free of the channel.
2
You’re now ready to install the new door gasket.
3
Leaving a small amount extended past the bottom of the channel, press approximately six inches of the new gasket into the channel with the lip facing outward.
4
Repeat for the opposite side.
5
With both ends secured, stretch the gasket as you position it in the remainder of the channel.
6
Once the gasket in fully installed confirm that the door closes and seals properly.
Description
This video provides step-by-step instructions for replacing the door gasket on GE dishwashers. The most common reason for replacing the gasket is when water is leaking from the dishwasher door.
All of the information in this gasket replacement video is applicable to the following brands: GE
Tools used: none
All of the information in this gasket replacement video is applicable to the following brands: GE
Tools used: none
Step-By-Step Instructions
1
To replace the door gasket in your dishwasher open the dishwasher door and, starting at one end, pull the old gasket free of the channel.
2
You’re now ready to install the new door gasket.
3
Leaving a small amount extended past the bottom of the channel, press approximately six inches of the new gasket into the channel with the lip facing outward.
4
Repeat for the opposite side.
5
With both ends secured, stretch the gasket as you position it in the remainder of the channel.
6
Once the gasket in fully installed confirm that the door closes and seals properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com