Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Turbidity Sensor Replacement #WD21X10494
GE Dishwasher Turbidity Sensor Replacement #WD21X10494
Skill Level
Total Parts Cost
$36.52Estimated Savings
$112.5002:16
- Description
This video provides step-by-step instructions for replacing the turbidity sensor on GE dishwashers. The most common reasons for replacing the turbidity sensor is if the dishwasher has longer or shorter wash cycles than necessary or the dishes do not come out clean.
All of the information in this turbidity sensor replacement video is applicable to the following brands: GE
Tools used: 1/4” socket or nut driver, flat-head screwdriver
All of the information in this turbidity sensor replacement video is applicable to the following brands: GE
Tools used: 1/4” socket or nut driver, flat-head screwdriver
Step By Step Instructions
1
Before you replace the turbidity sensor in your dishwasher turn off the power to the appliance.
2
Use a quarter-inch socket or nut driver to remove the screws securing the lower access panel.
3
Remove the panel along with any insulation.
4
Reach under the dishwasher and use a flat-head screwdriver to help rotate the old turbidity sensor counter-clockwise to detach it from the pump housing.
5
Disconnect the wire connecter to fully remove the old sensor.
6
Install the new turbidity sensor by first connecting the wire connecter.
7
Now fully seat the sensor in the pump housing and rotate clockwise to lock it into place.
8
Replace any insulation.
9
Reposition the lower access panel and secure it with the screws.
10
With the repair completed, turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the turbidity sensor on GE dishwashers. The most common reasons for replacing the turbidity sensor is if the dishwasher has longer or shorter wash cycles than necessary or the dishes do not come out clean.
All of the information in this turbidity sensor replacement video is applicable to the following brands: GE
Tools used: 1/4” socket or nut driver, flat-head screwdriver
All of the information in this turbidity sensor replacement video is applicable to the following brands: GE
Tools used: 1/4” socket or nut driver, flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the turbidity sensor in your dishwasher turn off the power to the appliance.
2
Use a quarter-inch socket or nut driver to remove the screws securing the lower access panel.
3
Remove the panel along with any insulation.
4
Reach under the dishwasher and use a flat-head screwdriver to help rotate the old turbidity sensor counter-clockwise to detach it from the pump housing.
5
Disconnect the wire connecter to fully remove the old sensor.
6
Install the new turbidity sensor by first connecting the wire connecter.
7
Now fully seat the sensor in the pump housing and rotate clockwise to lock it into place.
8
Replace any insulation.
9
Reposition the lower access panel and secure it with the screws.
10
With the repair completed, turn the power supply back on and your dishwasher should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Cleaner
$9.80
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com