Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Water Supply Tube Replacement #WD12X20117
GE Dishwasher Water Supply Tube Replacement #WD12X20117
Skill Level
Total Parts Cost
$29.24Estimated Savings
$112.5002:33
- Description
This video provides step-by-step instructions for replacing the water supply tube on GE dishwashers. The most common reason for replacing the water supply tube is if it is cracked or otherwise damaged in any way, which can cause the wash arms to not get enough water pressure to clean the dishes.
All of the information in this water supply tube replacement video is applicable to the following brands: GE
Tools used: small flat-head screwdriver, 1/4” socket or nut driver.
All of the information in this water supply tube replacement video is applicable to the following brands: GE
Tools used: small flat-head screwdriver, 1/4” socket or nut driver.
Step By Step Instructions
1
To replace the water supply tube in your dishwasher first remove the lower dish rack.
2
Pull the upper rack forward and depress the retaining tabs to fully remove the rack.
3
Use a small flat-head screwdriver to release the support tabs to detach the upper wash arm.
4
Use a quarter-inch socket or nut driver to unthread the screw securing the water supply tube to the top of the tank.
5
Pull the tabs back to release the tube from the rear of the tank then bend the tube forward to release it from the pump housing.
6
Prepare the new water supply tube for installation by transferring the gasket, the heating element support and the adapter port from the old tube to the new one.
7
Now align the heating element in the support as you insert the tube into the pump housing.
8
Snap the adapter port into place on the rear tank retaining bracket.
9
Align the tube on the upper support, snap it into position and rethread the screw.
10
Align upper wash arm on the water supply tube and snap it into place.
11
Realign the upper dish rack on the support rails and push forward to lock it into place.
12
Replace the lower rack to complete the repair.
Description
This video provides step-by-step instructions for replacing the water supply tube on GE dishwashers. The most common reason for replacing the water supply tube is if it is cracked or otherwise damaged in any way, which can cause the wash arms to not get enough water pressure to clean the dishes.
All of the information in this water supply tube replacement video is applicable to the following brands: GE
Tools used: small flat-head screwdriver, 1/4” socket or nut driver.
All of the information in this water supply tube replacement video is applicable to the following brands: GE
Tools used: small flat-head screwdriver, 1/4” socket or nut driver.
Step-By-Step Instructions
1
To replace the water supply tube in your dishwasher first remove the lower dish rack.
2
Pull the upper rack forward and depress the retaining tabs to fully remove the rack.
3
Use a small flat-head screwdriver to release the support tabs to detach the upper wash arm.
4
Use a quarter-inch socket or nut driver to unthread the screw securing the water supply tube to the top of the tank.
5
Pull the tabs back to release the tube from the rear of the tank then bend the tube forward to release it from the pump housing.
6
Prepare the new water supply tube for installation by transferring the gasket, the heating element support and the adapter port from the old tube to the new one.
7
Now align the heating element in the support as you insert the tube into the pump housing.
8
Snap the adapter port into place on the rear tank retaining bracket.
9
Align the tube on the upper support, snap it into position and rethread the screw.
10
Align upper wash arm on the water supply tube and snap it into place.
11
Realign the upper dish rack on the support rails and push forward to lock it into place.
12
Replace the lower rack to complete the repair.
Applicable Product Model
Recommended Tools and Accessories
Cleaner
$9.80
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com