Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Microwave Touchpad and Control Panel #W10443378
Whirlpool Microwave Touchpad and Control Panel #W10443378
Skill Level
Total Parts Cost
$159.51Estimated Savings
$112.5004:12
- Description
This video provides step-by-step instructions for replacing the touch pad and control panel on Whirlpool microwaves. The most common reason for replacing the panel is when the control panel buttons don’t work.
All of the information in this touchpad and control panel replacement video is applicable to the following brands: Whirlpool
Tools used: Phillips head screwdriver
All of the information in this touchpad and control panel replacement video is applicable to the following brands: Whirlpool
Tools used: Phillips head screwdriver
Step By Step Instructions
1
To replace the touchpad and control panel assembly in your microwave oven first unplug the power cord.
2
Now use a phillips-head screwdriver to unthread the screws securing the grill.
3
Pull the grill forward from the top to remove.
4
Open the oven door and remove the mounting screw securing the control panel.
5
Lift the control panel up to detach.
6
Note the orientation of the wires connected to the control board then depress the locking tabs, if necessary, to disconnect the wires.
7
Free the hinge tab from the front panel and remove the screw and washer securing the grounding wire.
8
Release the ribbon connecter.
9
Remove the two screws securing the main control board and housing to the control panel.
10
Depress the retaining tabs and pull the housing out.
11
Prepare the new touchpad and control panel assembly for installation by removing all of the protective coverings.
12
Now align the control board housing in the new panel and snap it into place.
13
Thread the screws to secure.
14
Connect the ribbon connecter.
15
Secure the grounding wire with the screw and washer.
16
Insert the hinge tab into the front panel and reconnect the remaining wires to the appropriate terminals on the board.
17
Insert the control panel tabs into the front panel slots and push the panel down.
18
Replace the mounting screw to secure.
19
Realign the grill and snap it into place then rethread the screws to secure.
20
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Description
This video provides step-by-step instructions for replacing the touch pad and control panel on Whirlpool microwaves. The most common reason for replacing the panel is when the control panel buttons don’t work.
All of the information in this touchpad and control panel replacement video is applicable to the following brands: Whirlpool
Tools used: Phillips head screwdriver
All of the information in this touchpad and control panel replacement video is applicable to the following brands: Whirlpool
Tools used: Phillips head screwdriver
Step-By-Step Instructions
1
To replace the touchpad and control panel assembly in your microwave oven first unplug the power cord.
2
Now use a phillips-head screwdriver to unthread the screws securing the grill.
3
Pull the grill forward from the top to remove.
4
Open the oven door and remove the mounting screw securing the control panel.
5
Lift the control panel up to detach.
6
Note the orientation of the wires connected to the control board then depress the locking tabs, if necessary, to disconnect the wires.
7
Free the hinge tab from the front panel and remove the screw and washer securing the grounding wire.
8
Release the ribbon connecter.
9
Remove the two screws securing the main control board and housing to the control panel.
10
Depress the retaining tabs and pull the housing out.
11
Prepare the new touchpad and control panel assembly for installation by removing all of the protective coverings.
12
Now align the control board housing in the new panel and snap it into place.
13
Thread the screws to secure.
14
Connect the ribbon connecter.
15
Secure the grounding wire with the screw and washer.
16
Insert the hinge tab into the front panel and reconnect the remaining wires to the appropriate terminals on the board.
17
Insert the control panel tabs into the front panel slots and push the panel down.
18
Replace the mounting screw to secure.
19
Realign the grill and snap it into place then rethread the screws to secure.
20
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Touchpad and Control Panel
$159.51
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com