Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Gas Range Burner Orifice Holder, Right Rear #MBE61841401
LG Gas Range Burner Orifice Holder, Right Rear #MBE61841401
Skill Level
Total Parts Cost
$54.38Estimated Savings
$112.5004:47
- Description
This video provides step-by-step repair instructions for replacing the right rear orifice holder on an LG gas range. The most common reasons for replacing the orifice holder are when it is damaged or missing.
All of the information for this right rear orifice holder replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver, putty knife, 10mm wrench, ½ inch wrench
All of the information for this right rear orifice holder replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver, putty knife, 10mm wrench, ½ inch wrench
Step By Step Instructions
1
Before replace the right rear orifice holder in your range first unplug the power cord
2
Shut off the gas supply.
3
Now lift off the three grates.
4
Next, remove all of the burner caps and the burner bases.
5
Use a phillips-head screwdriver to unthread the fifteen screws securing the main top to the orifice holders.
6
Now insert a putty knife under the main top to release the retaining clips.
7
You can now fully remove the main top.
8
Straighten the retaining tab securing the spark electrode bracket and detach the electrode and bracket from the orifice holder.
9
Use a 10mm wrench to unthread the orifice from the holder.
10
Now use a half-inch wrench to unthread the nut securing the burner tube.
11
Next, unthread the mounting screw to remove the old holder.
12
Install the new orifice holder by positioning it on the burner bracket.
13
Thread the mounting screw to secure.
14
Insert the burner tube into the new holder and tighten the nut to secure.
15
Apply sealant to the threads of the orifice then thread the orifice into the holder.
16
Align the spark electrode and bracket in the holder and bend the retaining tab back to secure.
17
Reposition and lower the main top.
18
Making sure the orifice holders and spark electrodes protrude through the openings, snap the main top into place.
19
Rethread the screws to secure the orifice holders to the main top.
20
Replace the burner bases making sure the spark electrodes align with the holes.
21
Position the burner caps.
22
Replace the burner grates plug the power cord back in turn the gas supply back on and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the right rear orifice holder on an LG gas range. The most common reasons for replacing the orifice holder are when it is damaged or missing.
All of the information for this right rear orifice holder replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver, putty knife, 10mm wrench, ½ inch wrench
All of the information for this right rear orifice holder replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver, putty knife, 10mm wrench, ½ inch wrench
Step-By-Step Instructions
1
Before replace the right rear orifice holder in your range first unplug the power cord
2
Shut off the gas supply.
3
Now lift off the three grates.
4
Next, remove all of the burner caps and the burner bases.
5
Use a phillips-head screwdriver to unthread the fifteen screws securing the main top to the orifice holders.
6
Now insert a putty knife under the main top to release the retaining clips.
7
You can now fully remove the main top.
8
Straighten the retaining tab securing the spark electrode bracket and detach the electrode and bracket from the orifice holder.
9
Use a 10mm wrench to unthread the orifice from the holder.
10
Now use a half-inch wrench to unthread the nut securing the burner tube.
11
Next, unthread the mounting screw to remove the old holder.
12
Install the new orifice holder by positioning it on the burner bracket.
13
Thread the mounting screw to secure.
14
Insert the burner tube into the new holder and tighten the nut to secure.
15
Apply sealant to the threads of the orifice then thread the orifice into the holder.
16
Align the spark electrode and bracket in the holder and bend the retaining tab back to secure.
17
Reposition and lower the main top.
18
Making sure the orifice holders and spark electrodes protrude through the openings, snap the main top into place.
19
Rethread the screws to secure the orifice holders to the main top.
20
Replace the burner bases making sure the spark electrodes align with the holes.
21
Position the burner caps.
22
Replace the burner grates plug the power cord back in turn the gas supply back on and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com