Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Gas Oven Bake Burner Assembly Replacement #ABF72909003
LG Gas Oven Bake Burner Assembly Replacement #ABF72909003
Skill Level
Total Parts Cost
$82.51Estimated Savings
$112.5005:08
- Description
This video provides step-by-step repair instructions for replacing the oven bake burner assembly (oven burner tube) on an LG gas range. The most common reasons for replacing the oven bake burner assembly are when the oven takes too long to bake or when the oven overbakes food.
All of the information for this oven bake burner assembly replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
All of the information for this oven bake burner assembly replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
Step By Step Instructions
1
Before you replace the bake burner assembly in your range first unplug the power cord.
2
Shut off the gas supply.
3
Open the oven door and lift up both hinge stops.
4
Now fully remove the door.
5
Remove any shelving.
6
Use a phillips-head screwdriver to unthread the screws securing the oven’s bottom panel.
7
Lift out the bottom panel.
8
Next, remove the screws securing the burner shield.
9
Lift off the shield.
10
Now remove the screw to release the orifice cover.
11
Next, remove the two mounting screws securing the burner assembly.
12
Pull the oven igniter wire connecter up through the hole in the base and secure it.
13
If you have trouble accessing the wire connecter, you can remove the bottom drawer to reach it.
14
Now disconnect the wire connecter to fully remove the old burner assembly.
15
Prepare the new bake burner assembly for installation by transferring the oven igniter from the old assembly to the new one.
16
Confirm that the air shutter is positioned the same on the new burner tube as it was on the old one.
17
Now align the new assembly and reconnect the igniter wire connecter.
18
Replace the mounting screws to secure the assembly.
19
Align the orifice cover and secure it with the screw.
20
Properly realign the burner shield and replace the screws.
21
Reposition the bottom panel and rethread the screws.
22
Replace the shelving.
23
Reinstall the oven door by reinserting the hinges into the slots in the frame.
24
Fully open the door and flip both hinge stops down.
25
With the repair completed. plug the power cord back in turn the gas supply back on and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the oven bake burner assembly (oven burner tube) on an LG gas range. The most common reasons for replacing the oven bake burner assembly are when the oven takes too long to bake or when the oven overbakes food.
All of the information for this oven bake burner assembly replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
All of the information for this oven bake burner assembly replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the bake burner assembly in your range first unplug the power cord.
2
Shut off the gas supply.
3
Open the oven door and lift up both hinge stops.
4
Now fully remove the door.
5
Remove any shelving.
6
Use a phillips-head screwdriver to unthread the screws securing the oven’s bottom panel.
7
Lift out the bottom panel.
8
Next, remove the screws securing the burner shield.
9
Lift off the shield.
10
Now remove the screw to release the orifice cover.
11
Next, remove the two mounting screws securing the burner assembly.
12
Pull the oven igniter wire connecter up through the hole in the base and secure it.
13
If you have trouble accessing the wire connecter, you can remove the bottom drawer to reach it.
14
Now disconnect the wire connecter to fully remove the old burner assembly.
15
Prepare the new bake burner assembly for installation by transferring the oven igniter from the old assembly to the new one.
16
Confirm that the air shutter is positioned the same on the new burner tube as it was on the old one.
17
Now align the new assembly and reconnect the igniter wire connecter.
18
Replace the mounting screws to secure the assembly.
19
Align the orifice cover and secure it with the screw.
20
Properly realign the burner shield and replace the screws.
21
Reposition the bottom panel and rethread the screws.
22
Replace the shelving.
23
Reinstall the oven door by reinserting the hinges into the slots in the frame.
24
Fully open the door and flip both hinge stops down.
25
With the repair completed. plug the power cord back in turn the gas supply back on and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com