Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Gas Range Pressure Regulator Replacement #MDW61841001
LG Gas Range Pressure Regulator Replacement #MDW61841001
Skill Level
Total Parts Cost
$115.21Estimated Savings
$112.5003:56
- Description
This video provides step-by-step repair instructions for replacing the gas pressure regulator on an LG gas range. The most common reason for replacing the gas regulator is when the oven won’t heat.
All of the information for this gas pressure regulator replacement video is applicable to the following brands:
LG
Tools needed: adjustable wrenches, 9/16th inch wrench, Phillips head screwdriver, 11/16th inch wrench
All of the information for this gas pressure regulator replacement video is applicable to the following brands:
LG
Tools needed: adjustable wrenches, 9/16th inch wrench, Phillips head screwdriver, 11/16th inch wrench
Step By Step Instructions
1
Before replace the gas regulator on your range first unplug the power cord and shut off the gas supply.
2
Use two adjustable wrenches to remove the gas supply line from the regulator fitting.
3
Now unthread the fitting.
4
Next, use an 11/16th inch wrench to unthread the nut securing the manifold gas supply tube to the regulator.
5
Move the tube out of the way.
6
Use a 9/16th inch wrench to unthread the nut securing the gas tube to the inlet port of the oven safety valve.
7
Now use a phillip-head screwdriver to unthread the screws securing the regulator bracket to the rear panel.
8
Remove the assembly.
9
Unthread the screws to release the old regulator from the bracket.
10
Prepare the new gas regulator for installation by transferring the gas tube from the old regulator to the new one.
11
Make sure the shut-off valve is in the “on” position and slide on the protector if applicable.
12
Now align the new regulator on the mounting bracket and replace the screws to secure.
13
Align the assembly on the rear panel and insert the gas tube into the safety valve inlet port.
14
Thread the nut loosely.
15
Insert the manifold gas supply tube into the regulator and thread the nut loosely.
16
Replace the screws to secure the regulator mounting bracket to the rear panel.
17
Now tighten both nuts.
18
Apply some thread sealant to the fitting and thread the fitting into the regulator.
19
Now thread the gas supply line onto the fitting.
20
With the repair completed plug the power cord back in turn the gas supply back on and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the gas pressure regulator on an LG gas range. The most common reason for replacing the gas regulator is when the oven won’t heat.
All of the information for this gas pressure regulator replacement video is applicable to the following brands:
LG
Tools needed: adjustable wrenches, 9/16th inch wrench, Phillips head screwdriver, 11/16th inch wrench
All of the information for this gas pressure regulator replacement video is applicable to the following brands:
LG
Tools needed: adjustable wrenches, 9/16th inch wrench, Phillips head screwdriver, 11/16th inch wrench
Step-By-Step Instructions
1
Before replace the gas regulator on your range first unplug the power cord and shut off the gas supply.
2
Use two adjustable wrenches to remove the gas supply line from the regulator fitting.
3
Now unthread the fitting.
4
Next, use an 11/16th inch wrench to unthread the nut securing the manifold gas supply tube to the regulator.
5
Move the tube out of the way.
6
Use a 9/16th inch wrench to unthread the nut securing the gas tube to the inlet port of the oven safety valve.
7
Now use a phillip-head screwdriver to unthread the screws securing the regulator bracket to the rear panel.
8
Remove the assembly.
9
Unthread the screws to release the old regulator from the bracket.
10
Prepare the new gas regulator for installation by transferring the gas tube from the old regulator to the new one.
11
Make sure the shut-off valve is in the “on” position and slide on the protector if applicable.
12
Now align the new regulator on the mounting bracket and replace the screws to secure.
13
Align the assembly on the rear panel and insert the gas tube into the safety valve inlet port.
14
Thread the nut loosely.
15
Insert the manifold gas supply tube into the regulator and thread the nut loosely.
16
Replace the screws to secure the regulator mounting bracket to the rear panel.
17
Now tighten both nuts.
18
Apply some thread sealant to the fitting and thread the fitting into the regulator.
19
Now thread the gas supply line onto the fitting.
20
With the repair completed plug the power cord back in turn the gas supply back on and your range should be ready for use.
Applicable Product Model
Parts Needed
Pressure Regulator
$115.21
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com