Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairDishwasher Impeller & Seal Kit Installation #8193524 or 675806
Dishwasher Impeller & Seal Kit Installation #8193524 or 675806
Skill Level
Total Parts Cost
$107.46Estimated Savings
$150.0003:16
- Description
This video provides step-by-step instructions on replacing the wash impeller and motor shaft seal using either repair kit (8193524 or 675806) on Whirlpool, KitchenAid, Kenmore, and Maytag dishwashers with model prefix 665. The most common reason for replacing the wash impeller and motor shaft seal is when the dishwasher is making noises, leaking, or cleaning poorly.
All of the information in this impeller and seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Maytag
Tools used: Torx screwdriver, wrench, nut driver, flat-head screwdriver
All of the information in this impeller and seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Maytag
Tools used: Torx screwdriver, wrench, nut driver, flat-head screwdriver
Step By Step Instructions
1
Your first step is to pull out the lower dish rack.
2
Next, unscrew the retainer to release the lower wash arm.
3
Pull off the water supply tube from the pump and motor assembly.
4
Remove the screws to release the pump outlet.
5
Use a wrench to secure the old wash impeller as you remove the screw.
6
Be aware this may require some effort.
7
Use a flathead screwdriver to gently pry the old impeller loose.
8
Next, remove the screws to release the separator assembly.
9
Remove the grind bushing followed by the chopper blade and spring.
10
Lift out the drain check ball or balls.
11
Remove the screw and lift out the drain cover and gasket.
12
Remove the old drain impeller. Again, this may require some effort.
13
Use a flathead screwdriver to pry off the old motor shaft seal from the pump housing. You’re now ready to install the new impeller and seal kit.
14
First clean off the motor shaft then apply liquid dish soap or rinse aid to the new seal.
15
Slide the new seal over the motor shaft into the pump housing making sure the graphite ring is centered with the shaft.
16
Slide the new drain impeller on followed by the drain cover and gasket.
17
Secure with the screw.
18
Replace the check ball or balls.
19
Align the chopper blade and spring and slide over the drain impeller, making sure the end of the spring inserts into the hole.
20
Replace the separator assembly by lining up the port at the bottom with the port on the drain cover and secure the screws.
21
Insert the new wash impeller onto the drain impeller shaft and secure with the washer and screw.
22
Once assembled, be sure the impeller rotates smoothly.
23
Replace the old separator gasket with the new one.
24
Replace the pump outlet and secure the screws.
25
Realign the water supply tube and slide it onto the pump outlet.
26
Replace the lower wash arm and secure with the retainer.
27
Make sure the wash arm spins freely and replace the lower dish rack.
Description
This video provides step-by-step instructions on replacing the wash impeller and motor shaft seal using either repair kit (8193524 or 675806) on Whirlpool, KitchenAid, Kenmore, and Maytag dishwashers with model prefix 665. The most common reason for replacing the wash impeller and motor shaft seal is when the dishwasher is making noises, leaking, or cleaning poorly.
All of the information in this impeller and seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Maytag
Tools used: Torx screwdriver, wrench, nut driver, flat-head screwdriver
All of the information in this impeller and seal replacement video is applicable to the following brands: Whirlpool, KitchenAid, Kenmore, Maytag
Tools used: Torx screwdriver, wrench, nut driver, flat-head screwdriver
Step-By-Step Instructions
1
Your first step is to pull out the lower dish rack.
2
Next, unscrew the retainer to release the lower wash arm.
3
Pull off the water supply tube from the pump and motor assembly.
4
Remove the screws to release the pump outlet.
5
Use a wrench to secure the old wash impeller as you remove the screw.
6
Be aware this may require some effort.
7
Use a flathead screwdriver to gently pry the old impeller loose.
8
Next, remove the screws to release the separator assembly.
9
Remove the grind bushing followed by the chopper blade and spring.
10
Lift out the drain check ball or balls.
11
Remove the screw and lift out the drain cover and gasket.
12
Remove the old drain impeller. Again, this may require some effort.
13
Use a flathead screwdriver to pry off the old motor shaft seal from the pump housing. You’re now ready to install the new impeller and seal kit.
14
First clean off the motor shaft then apply liquid dish soap or rinse aid to the new seal.
15
Slide the new seal over the motor shaft into the pump housing making sure the graphite ring is centered with the shaft.
16
Slide the new drain impeller on followed by the drain cover and gasket.
17
Secure with the screw.
18
Replace the check ball or balls.
19
Align the chopper blade and spring and slide over the drain impeller, making sure the end of the spring inserts into the hole.
20
Replace the separator assembly by lining up the port at the bottom with the port on the drain cover and secure the screws.
21
Insert the new wash impeller onto the drain impeller shaft and secure with the washer and screw.
22
Once assembled, be sure the impeller rotates smoothly.
23
Replace the old separator gasket with the new one.
24
Replace the pump outlet and secure the screws.
25
Realign the water supply tube and slide it onto the pump outlet.
26
Replace the lower wash arm and secure with the retainer.
27
Make sure the wash arm spins freely and replace the lower dish rack.
Applicable Product Model
Parts Needed
Impeller and Seal Kit
$107.46
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com