Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Replace Door Latch Handle #9743903
KitchenAid Dishwasher Replace Door Latch Handle #9743903
Skill Level
Total Parts Cost
$72.94Estimated Savings
$112.5002:02
- Description
This video provides step-by-step instructions for replacing the door handle on KitchenAid dishwashers with model prefix 665. The most common reason for replacing the door latch handle is when the dishwasher is not closing properly or the handle is broken.
All of the information in this door latch handle replacement video is applicable to the following brands: KitchenAid
Tools used: Torx screwdriver, nut driver
All of the information in this door latch handle replacement video is applicable to the following brands: KitchenAid
Tools used: Torx screwdriver, nut driver
Step By Step Instructions
1
Before you begin, be sure you turn off the power supply to your dishwasher.
2
With the power off, your first step is to remove the screws to release the control panel and pull the panel off.
3
Move the moisture shield out of the way and squeeze the tabs to disconnect the ribbon wire.
4
If applicable, disconnect the rinse aid sensor wire.
5
Remove the mounting screws to release the interface board.
6
Slide the old door latch handle out of the control board.
7
Install the new door latch handle by first transferring the door latch link and spring from the old component to the new one.
8
Slide the new handle into the control board.
9
Reinstall the user interface board and secure with the screws.
10
Move the moisture shield back into place.
11
Reconnect the rinse aid sensor wire if necessary and ribbon wire.
12
Carefully align the control panel and replace the screws.
13
You’re now ready to restore power to your dishwasher to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the door handle on KitchenAid dishwashers with model prefix 665. The most common reason for replacing the door latch handle is when the dishwasher is not closing properly or the handle is broken.
All of the information in this door latch handle replacement video is applicable to the following brands: KitchenAid
Tools used: Torx screwdriver, nut driver
All of the information in this door latch handle replacement video is applicable to the following brands: KitchenAid
Tools used: Torx screwdriver, nut driver
Step-By-Step Instructions
1
Before you begin, be sure you turn off the power supply to your dishwasher.
2
With the power off, your first step is to remove the screws to release the control panel and pull the panel off.
3
Move the moisture shield out of the way and squeeze the tabs to disconnect the ribbon wire.
4
If applicable, disconnect the rinse aid sensor wire.
5
Remove the mounting screws to release the interface board.
6
Slide the old door latch handle out of the control board.
7
Install the new door latch handle by first transferring the door latch link and spring from the old component to the new one.
8
Slide the new handle into the control board.
9
Reinstall the user interface board and secure with the screws.
10
Move the moisture shield back into place.
11
Reconnect the rinse aid sensor wire if necessary and ribbon wire.
12
Carefully align the control panel and replace the screws.
13
You’re now ready to restore power to your dishwasher to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com