Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Door Gasket Replacement #W10112096
KitchenAid Dishwasher Door Gasket Replacement #W10112096
Skill Level
Total Parts Cost
$78.28Estimated Savings
$112.5001:01
- Description
This video provides step-by-step instructions for replacing the door gasket on KitchenAid dishwashers with model prefix 665. The most common reason for replacing the door gasket is when the dishwasher is leaking.
All of the information in this door gasket replacement video is applicable to the following brands: KitchenAid, Kenmore, Maytag, Whirlpool, Jenn Air, Ikea
All of the information in this door gasket replacement video is applicable to the following brands: KitchenAid, Kenmore, Maytag, Whirlpool, Jenn Air, Ikea
Step By Step Instructions
1
Open the dishwasher door to access the old gasket.
2
If still intact, remove the old gasket from the tank channel by taking hold of one end and pulling outward.
3
Install the new door gasket by first soaking it in hot water for a few minutes to soften it.
4
Once softened, align the center of the gasket under the door latch and insert into the tank channel.
5
Use your fingers to press each section in evenly.
6
Once the gasket is fully installed be sure to lock the door and keep it closed for several hours. This will allow the new gasket to properly form a seal around the door.
Description
This video provides step-by-step instructions for replacing the door gasket on KitchenAid dishwashers with model prefix 665. The most common reason for replacing the door gasket is when the dishwasher is leaking.
All of the information in this door gasket replacement video is applicable to the following brands: KitchenAid, Kenmore, Maytag, Whirlpool, Jenn Air, Ikea
All of the information in this door gasket replacement video is applicable to the following brands: KitchenAid, Kenmore, Maytag, Whirlpool, Jenn Air, Ikea
Step-By-Step Instructions
1
Open the dishwasher door to access the old gasket.
2
If still intact, remove the old gasket from the tank channel by taking hold of one end and pulling outward.
3
Install the new door gasket by first soaking it in hot water for a few minutes to soften it.
4
Once softened, align the center of the gasket under the door latch and insert into the tank channel.
5
Use your fingers to press each section in evenly.
6
Once the gasket is fully installed be sure to lock the door and keep it closed for several hours. This will allow the new gasket to properly form a seal around the door.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com