Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Range Indicator Light Replacement #8523265
Whirlpool Range Indicator Light Replacement #8523265
Skill Level
Total Parts Cost
$53.20Estimated Savings
$112.5002:04
- Description
This video provides step-by-step repair instructions for replacing the indicator light on a Whirlpool electric range. The most common reason for replacing the indicator light is light not turning on.
All of the information for this indicator light replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
All of the information for this indicator light replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
Step By Step Instructions
1
Before you replace an indicator light in your range be sure to unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the upper rear access panel.
3
Pull the panel down to detach.
4
Detach the indicator light from the light lens.
5
Note the locating of the wires then disconnect them.
6
Install the new indicator light by first connecting the wires to the terminals.
7
Now slide the new light onto the lens and snap it into place.
8
Reinstall the upper rear access panel by inserting the upper tabs under the control panel then align the bottom tab with the lower access panel.
9
Replace the screws to secure.
10
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the indicator light on a Whirlpool electric range. The most common reason for replacing the indicator light is light not turning on.
All of the information for this indicator light replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
All of the information for this indicator light replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace an indicator light in your range be sure to unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the upper rear access panel.
3
Pull the panel down to detach.
4
Detach the indicator light from the light lens.
5
Note the locating of the wires then disconnect them.
6
Install the new indicator light by first connecting the wires to the terminals.
7
Now slide the new light onto the lens and snap it into place.
8
Reinstall the upper rear access panel by inserting the upper tabs under the control panel then align the bottom tab with the lower access panel.
9
Replace the screws to secure.
10
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com