Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Range Warm Zone Switch Button Replacement #W10315961
Whirlpool Range Warm Zone Switch Button Replacement #W10315961
Skill Level
Total Parts Cost
$12.80Estimated Savings
$112.5002:21
- Description
This video provides step-by-step repair instructions for replacing the warm zone switch button on a Whirlpool electric range. The most common reasons for replacing the button is if it is cracked or broken.
All of the information for this button replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver, phillips head screwdriver
All of the information for this button replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver, phillips head screwdriver
Step By Step Instructions
1
Before you replace the warm zone switch button on your range be sure to unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the upper rear access panel.
3
Pull the panel down to detach.
4
Use a small flat-head screwdriver to depress the front locking tabs to release the warm zone switch assembly then push the assembly forward.
5
You will need to depress the rear locking tabs to release the bezel and the old button.
6
To install the new warm zone switch button first make sure the switch itself is properly positioned in the control panel.
7
Then align the new button slide on the bezel snap the bezel onto the switch and snap the assembly into the panel.
8
Reinstall the upper rear access panel by inserting the upper tabs under the control panel then align the bottom tab with the lower access panel.
9
Replace the screws to secure.
10
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the warm zone switch button on a Whirlpool electric range. The most common reasons for replacing the button is if it is cracked or broken.
All of the information for this button replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver, phillips head screwdriver
All of the information for this button replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver, phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the warm zone switch button on your range be sure to unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the upper rear access panel.
3
Pull the panel down to detach.
4
Use a small flat-head screwdriver to depress the front locking tabs to release the warm zone switch assembly then push the assembly forward.
5
You will need to depress the rear locking tabs to release the bezel and the old button.
6
To install the new warm zone switch button first make sure the switch itself is properly positioned in the control panel.
7
Then align the new button slide on the bezel snap the bezel onto the switch and snap the assembly into the panel.
8
Reinstall the upper rear access panel by inserting the upper tabs under the control panel then align the bottom tab with the lower access panel.
9
Replace the screws to secure.
10
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com