DescriptionThis video provides step-by-step repair instructions for replacing the drawer glide on a Whirlpool electric range. The most common reasons for replacing the drawer glide are the drawer not sliding smoothly or the drawer not opening at all.
All of the information for this drawer glide replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver
Step-By-Step Instructions1
To replace a rear drawer glide on your range slide out the drawer and remove it.
2
Use a small flat-head screwdriver to release the retaining clip to detach the old drawer glide if still intact.
3
Install the new rear drawer glide by aligning the tab in the drawer slot and snapping the glide into place.
4
You can now replace the drawer in the range.