Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Range Warm Zone Element Replacement #W10388271
Whirlpool Range Warm Zone Element Replacement #W10388271
Skill Level
Total Parts Cost
$95.28Estimated Savings
$112.5002:48
- Description
This video provides step-by-step repair instructions for replacing the warm zone element on a Whirlpool electric range. The most common reason for replacing the warm zone element is the element not heating up.
All of the information for this warm zone element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
All of the information for this warm zone element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
Step By Step Instructions
1
Before you replace the warm zone element in your range be sure to unplug the power cord.
2
Open the oven door and use a phillips-head screwdriver to unthread the two screws securing the main top.
3
Carefully lift up the top and move it to the side to detach it from the hinges.
4
Release the warm zone element retaining clips.
5
Note the orientation of the wires then disconnect them.
6
Prepare the new warm zone element for installation by transferring the retaining clips from the old element to the new one.
7
Now connect the wires to the appropriate terminals on the new element.
8
Insert the retaining clips into the slots and snap the element into place.
9
Reinstall the main top by aligning the hinge pins on the hinges then lower the top.
10
Thread the screws to secure the top.
11
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the warm zone element on a Whirlpool electric range. The most common reason for replacing the warm zone element is the element not heating up.
All of the information for this warm zone element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
All of the information for this warm zone element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the warm zone element in your range be sure to unplug the power cord.
2
Open the oven door and use a phillips-head screwdriver to unthread the two screws securing the main top.
3
Carefully lift up the top and move it to the side to detach it from the hinges.
4
Release the warm zone element retaining clips.
5
Note the orientation of the wires then disconnect them.
6
Prepare the new warm zone element for installation by transferring the retaining clips from the old element to the new one.
7
Now connect the wires to the appropriate terminals on the new element.
8
Insert the retaining clips into the slots and snap the element into place.
9
Reinstall the main top by aligning the hinge pins on the hinges then lower the top.
10
Thread the screws to secure the top.
11
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com