Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Range Broil Element Replacement #W10535127
Whirlpool Range Broil Element Replacement #W10535127
Skill Level
Total Parts Cost
$116.76Estimated Savings
$112.5003:00
- Description
This video provides step-by-step repair instructions for replacing the broil element on a Whirlpool electric range. The most common reason for replacing the broil element is the element not heating up.
All of the information for this broil element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
All of the information for this broil element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
Step By Step Instructions
1
Before you replace the broil element in your range be sure to unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the upper rear access panel.
3
Pull the panel down to detach.
4
Disconnect the wires from the broil element terminals.
5
Next, remove the oven racks if necessary.
6
Unthread the screw securing the broil element to the rear interior panel.
7
Now unthread the screws securing the front mounting bracket.
8
Pull the old element free.
9
Install the new broil element by inserting the terminals through the holes in the rear panel.
10
Thread the screws to secure the front mounting bracket.
11
Replace the screw to secure the element to the rear panel.
12
Replace the oven racks as necessary.
13
Connect the wires to the terminals of the new element.
14
Reinstall the upper rear access panel by inserting the upper tabs under the control panel then align the bottom tab with the lower access panel.
15
Replace the screws to secure.
16
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the broil element on a Whirlpool electric range. The most common reason for replacing the broil element is the element not heating up.
All of the information for this broil element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
All of the information for this broil element replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the broil element in your range be sure to unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the upper rear access panel.
3
Pull the panel down to detach.
4
Disconnect the wires from the broil element terminals.
5
Next, remove the oven racks if necessary.
6
Unthread the screw securing the broil element to the rear interior panel.
7
Now unthread the screws securing the front mounting bracket.
8
Pull the old element free.
9
Install the new broil element by inserting the terminals through the holes in the rear panel.
10
Thread the screws to secure the front mounting bracket.
11
Replace the screw to secure the element to the rear panel.
12
Replace the oven racks as necessary.
13
Connect the wires to the terminals of the new element.
14
Reinstall the upper rear access panel by inserting the upper tabs under the control panel then align the bottom tab with the lower access panel.
15
Replace the screws to secure.
16
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com