Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Electric Dryer Replace Outer Door Window #137067900
Electrolux Electric Dryer Replace Outer Door Window #137067900
Skill Level
Total Parts Cost
$149.76Estimated Savings
$112.5004:02
- Description
This video provides step-by-step instructions for replacing the outer door window on Electrolux electric dryers. The most common reason for replacing the window glass is if it is cracked.
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this outer door window replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this outer door window replacement video is applicable to the following brands: Electrolux
Step By Step Instructions
1
Before you replace the outer door window assembly in your dryer be sure to unplug the power cord.
2
Open the dryer door and support it as you use a number two square bit or a phillips-head screwdriver to unthread the four screws securing the door to the hinge.
3
Detach the door.
4
Next, unthread the four screws securing the latch assembly.
5
Slide out the assembly.
6
Now remove the screws securing the two glass supports.
7
You can use a small flat-head screwdriver to help pry the supports loose.
8
Lift out the inner door glass.
9
Prepare the new outer door window assembly for installation by first removing the protective covering.
10
Next, transfer the push indicator from the old assembly to the new one.
11
Transfer the trim piece as well to the opposite side.
12
Now realign the top support on the inner glass and position the support on the door.
13
Align the bottom support on the glass, position the support and snap both supports into place on the door.
14
Replace the screws to secure.
15
Realign the door latch assembly on the door then thread and tighten the screws to secure.
16
Realign the dryer door on the hinge then thread and tighten the screws.
17
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the outer door window on Electrolux electric dryers. The most common reason for replacing the window glass is if it is cracked.
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this outer door window replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this outer door window replacement video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
Before you replace the outer door window assembly in your dryer be sure to unplug the power cord.
2
Open the dryer door and support it as you use a number two square bit or a phillips-head screwdriver to unthread the four screws securing the door to the hinge.
3
Detach the door.
4
Next, unthread the four screws securing the latch assembly.
5
Slide out the assembly.
6
Now remove the screws securing the two glass supports.
7
You can use a small flat-head screwdriver to help pry the supports loose.
8
Lift out the inner door glass.
9
Prepare the new outer door window assembly for installation by first removing the protective covering.
10
Next, transfer the push indicator from the old assembly to the new one.
11
Transfer the trim piece as well to the opposite side.
12
Now realign the top support on the inner glass and position the support on the door.
13
Align the bottom support on the glass, position the support and snap both supports into place on the door.
14
Replace the screws to secure.
15
Realign the door latch assembly on the door then thread and tighten the screws to secure.
16
Realign the dryer door on the hinge then thread and tighten the screws.
17
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com