Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLennox Furnace Rollout Switch Replacement #25M60
Lennox Furnace Rollout Switch Replacement #25M60
Skill Level
Total Parts Cost
$53.82Estimated Savings
$112.5001:51
- Description
This video provides step-by-step instructions for replacing the flame rollout limit switch on Lennox furnaces. The most common reasons for replacing this switch are when the furnace does not heat or runs only for a few minutes or when the furnace blower runs all the time.
All of the information in this rollout switch replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
All of the information in this rollout switch replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
Step By Step Instructions
1
Before you replace a rollout switch in your furnace first turn off the power to the furnace.
2
Unthread the retaining knobs securing the upper access panel and remove the panel.
3
Disconnect the wires from the switch you’re replacing.
4
Now use a quarter inch socket or nut driver to unthread the mounting screws securing the switch.
5
Lift off the old switch.
6
Install the new rollout switch by positioning it in the notch on the burner housing.
7
Thread and tighten the screws to secure.
8
Connect the wires.
9
Replace the upper access panel by aligning the top edge first then thread the retaining knobs to secure.
10
With the repair completed turn the power back on and your furnace should be ready for use.
Description
This video provides step-by-step instructions for replacing the flame rollout limit switch on Lennox furnaces. The most common reasons for replacing this switch are when the furnace does not heat or runs only for a few minutes or when the furnace blower runs all the time.
All of the information in this rollout switch replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
All of the information in this rollout switch replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
Step-By-Step Instructions
1
Before you replace a rollout switch in your furnace first turn off the power to the furnace.
2
Unthread the retaining knobs securing the upper access panel and remove the panel.
3
Disconnect the wires from the switch you’re replacing.
4
Now use a quarter inch socket or nut driver to unthread the mounting screws securing the switch.
5
Lift off the old switch.
6
Install the new rollout switch by positioning it in the notch on the burner housing.
7
Thread and tighten the screws to secure.
8
Connect the wires.
9
Replace the upper access panel by aligning the top edge first then thread the retaining knobs to secure.
10
With the repair completed turn the power back on and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com