Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLennox Furnace Transformer Replacement #42J32
Lennox Furnace Transformer Replacement #42J32
Skill Level
Total Parts Cost
$30.77Estimated Savings
$112.5002:21
- Description
This video provides step-by-step instructions for replacing the transformer on Lennox furnaces. The most common reason for replacing the transformer is if it fails, which causes the furnace to be unable to run.
All of the information in this transformer replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
All of the information in this transformer replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
Step By Step Instructions
1
Before you replace the transformer in your furnace first turn off the power to the furnace.
2
Unthread the retaining knobs securing the upper access panel and remove the panel.
3
Use a quarter-inch socket or nut driver to unthread the mounting screws securing the lower access panel.
4
Lift the panel up to remove.
5
Note the orientation of the wires attached to the transformer then disconnect them.
6
Use the quarter-inch socket or nut driver to unthread the two mounting screws to release the old transformer.
7
Install the new transformer by aligning it on the mounting plate then thread and tighten the screws to secure.
8
Connect the wires to the appropriate terminals.
9
Replace the lower access panel by aligning the bottom edge first.
10
Thread and tighten the screws to secure.
11
Realign the top edge of the upper access panel then thread the retaining knobs to secure.
12
With the repair completed
13
Turn the power back on and your furnace should be ready for use.
Description
This video provides step-by-step instructions for replacing the transformer on Lennox furnaces. The most common reason for replacing the transformer is if it fails, which causes the furnace to be unable to run.
All of the information in this transformer replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
All of the information in this transformer replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
Step-By-Step Instructions
1
Before you replace the transformer in your furnace first turn off the power to the furnace.
2
Unthread the retaining knobs securing the upper access panel and remove the panel.
3
Use a quarter-inch socket or nut driver to unthread the mounting screws securing the lower access panel.
4
Lift the panel up to remove.
5
Note the orientation of the wires attached to the transformer then disconnect them.
6
Use the quarter-inch socket or nut driver to unthread the two mounting screws to release the old transformer.
7
Install the new transformer by aligning it on the mounting plate then thread and tighten the screws to secure.
8
Connect the wires to the appropriate terminals.
9
Replace the lower access panel by aligning the bottom edge first.
10
Thread and tighten the screws to secure.
11
Realign the top edge of the upper access panel then thread the retaining knobs to secure.
12
With the repair completed
13
Turn the power back on and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Transformer
$30.77
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com