Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Front-Load Washer Leaking? Drain Pump #137221600
Frigidaire Front-Load Washer Leaking? Drain Pump #137221600
Skill Level
Total Parts Cost
$157.95Estimated Savings
$112.5004:34
- Description
This video provides step-by-step repair instructions for replacing the drain pump on a Frigidaire front-loading washing machine. The most common reasons for replacing the drain pump are when the washer is leaking or is not draining.
All of the information for this drain pump replacement video is applicable to the following brands:
Frigidaire, Westinghouse, Kenmore, Gibson, Crosley, Universal, Electrolux, Tappan
Tools needed: multi-screwdriver, Phillips head bit, 5/16 socket, pliers
All of the information for this drain pump replacement video is applicable to the following brands:
Frigidaire, Westinghouse, Kenmore, Gibson, Crosley, Universal, Electrolux, Tappan
Tools needed: multi-screwdriver, Phillips head bit, 5/16 socket, pliers
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the back of the top panel
3
Pull the panel off.
4
Next, pull out the dispenser drawer
5
Depress the tab near the back to release it.
6
Remove the housing screws
7
As well as the control panel screws on top.
8
Now, depress the tabs to release the control panel and move it out of the way.
9
Use needle-nose pliers to remove the wire clamp and spring to release the boot seal from the front panel.
10
Carefully lift the washer up and support it with a wood block or comparable sturdy object.
11
This will allow you to remove the screws from the bottom of the front panel.
12
Set the washer back down
13
Remove the screws at the top of the panel.
14
Now lift the panel up and out to detach.
15
Disconnect the front panel wire harness and set the panel aside.
16
Reach under the tub
17
Release the clamp to the detach the inlet sump hose. Be prepared for some water to spill out.
18
Release the clamp to detach the drain hose
19
Disconnect the wire harness.
20
Remove the mounting screws to release the old drain pump.
21
Install the new drain pump by positioning it
22
Securing the mounting screws.
23
Reconnect the wire harness.
24
Reattach the drain hose and secure it with the clamp.
25
Reattach the inlet sump hose and secure the clamp.
26
Reconnect the front panel wire harness
27
Reposition the panel by aligning the holes in the panel with the nylon pins on the frame.
28
Replace the screws at the top of the panel.
29
Lift and support the washer
30
Then replace the screws at the bottom of the front panel.
31
Set the washer back down.
32
Realign the boot seal with the front panel
33
Secure it with the wire clamp and spring.
34
Reposition the control panel and snap it into place.
35
Replace the screws on top
36
As well as in the dispenser drawer housing.
37
Reinstall the dispenser drawer.
38
Reposition the top panel
39
Secure it with the screws.
40
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the drain pump on a Frigidaire front-loading washing machine. The most common reasons for replacing the drain pump are when the washer is leaking or is not draining.
All of the information for this drain pump replacement video is applicable to the following brands:
Frigidaire, Westinghouse, Kenmore, Gibson, Crosley, Universal, Electrolux, Tappan
Tools needed: multi-screwdriver, Phillips head bit, 5/16 socket, pliers
All of the information for this drain pump replacement video is applicable to the following brands:
Frigidaire, Westinghouse, Kenmore, Gibson, Crosley, Universal, Electrolux, Tappan
Tools needed: multi-screwdriver, Phillips head bit, 5/16 socket, pliers
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the back of the top panel
3
Pull the panel off.
4
Next, pull out the dispenser drawer
5
Depress the tab near the back to release it.
6
Remove the housing screws
7
As well as the control panel screws on top.
8
Now, depress the tabs to release the control panel and move it out of the way.
9
Use needle-nose pliers to remove the wire clamp and spring to release the boot seal from the front panel.
10
Carefully lift the washer up and support it with a wood block or comparable sturdy object.
11
This will allow you to remove the screws from the bottom of the front panel.
12
Set the washer back down
13
Remove the screws at the top of the panel.
14
Now lift the panel up and out to detach.
15
Disconnect the front panel wire harness and set the panel aside.
16
Reach under the tub
17
Release the clamp to the detach the inlet sump hose. Be prepared for some water to spill out.
18
Release the clamp to detach the drain hose
19
Disconnect the wire harness.
20
Remove the mounting screws to release the old drain pump.
21
Install the new drain pump by positioning it
22
Securing the mounting screws.
23
Reconnect the wire harness.
24
Reattach the drain hose and secure it with the clamp.
25
Reattach the inlet sump hose and secure the clamp.
26
Reconnect the front panel wire harness
27
Reposition the panel by aligning the holes in the panel with the nylon pins on the frame.
28
Replace the screws at the top of the panel.
29
Lift and support the washer
30
Then replace the screws at the bottom of the front panel.
31
Set the washer back down.
32
Realign the boot seal with the front panel
33
Secure it with the wire clamp and spring.
34
Reposition the control panel and snap it into place.
35
Replace the screws on top
36
As well as in the dispenser drawer housing.
37
Reinstall the dispenser drawer.
38
Reposition the top panel
39
Secure it with the screws.
40
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Drain Pump
$157.95
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com