Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Stove Cooktop Clip Replacement #98004722
Whirlpool Gas Range Stove Cooktop Clip Replacement #98004722
Skill Level
Total Parts Cost
$8.10Estimated Savings
$112.5003:46
- Description
This video provides step-by-step repair instructions for replacing the cooktop clip on a Whirlpool gas range. The most common reason for replacing the clip is if it is broken and the cooktop is not secure.
All of the information for this cooktop clip replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: Phillips head screwdriver, putty knife, quarter inch wrench, needle nose pliers
All of the information for this cooktop clip replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: Phillips head screwdriver, putty knife, quarter inch wrench, needle nose pliers
Step By Step Instructions
1
Before you replace a cooktop clip in your range unplug the power cord.
2
Carefully lift off the burner grates and remove all of the burner caps.
3
Using a phillips-head screwdriver, unthread the screws securing the burner heads.
4
Disconnect all of the spark wires from the surface igniters attached to the heads.
5
Now insert a putty knife under the main top to release the retaining clips.
6
Detach the main top and use a quarter-inch wrench to unthread the screw to release the grounding wire. You can now set the main top aside.
7
Use needle-nose pliers to detach the old cooktop clip.
8
Install the new cooktop clip by inserting it into the slot on the manifold panel and pushing it into place.
9
Before you reinstall the main top, we recommend inserting the spark wires in the orifice holders to secure them.
10
Now secure the grounding wire to the main top with the screw.
11
Reposition the right side of the main top first by hooking the rear edge on the mounting tab so the top is seated under the vent.
12
Now position the rear edge on the left mounting tab.
13
Making sure the orifice holders protrude through the holes in the main top snap the front edge into place.
14
When replacing the burner heads first connect the spark wires to the surface igniters.
15
Align the heads and rethread the screws to secure.
16
Replace the burner caps and reposition the grates.
17
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the cooktop clip on a Whirlpool gas range. The most common reason for replacing the clip is if it is broken and the cooktop is not secure.
All of the information for this cooktop clip replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: Phillips head screwdriver, putty knife, quarter inch wrench, needle nose pliers
All of the information for this cooktop clip replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: Phillips head screwdriver, putty knife, quarter inch wrench, needle nose pliers
Step-By-Step Instructions
1
Before you replace a cooktop clip in your range unplug the power cord.
2
Carefully lift off the burner grates and remove all of the burner caps.
3
Using a phillips-head screwdriver, unthread the screws securing the burner heads.
4
Disconnect all of the spark wires from the surface igniters attached to the heads.
5
Now insert a putty knife under the main top to release the retaining clips.
6
Detach the main top and use a quarter-inch wrench to unthread the screw to release the grounding wire. You can now set the main top aside.
7
Use needle-nose pliers to detach the old cooktop clip.
8
Install the new cooktop clip by inserting it into the slot on the manifold panel and pushing it into place.
9
Before you reinstall the main top, we recommend inserting the spark wires in the orifice holders to secure them.
10
Now secure the grounding wire to the main top with the screw.
11
Reposition the right side of the main top first by hooking the rear edge on the mounting tab so the top is seated under the vent.
12
Now position the rear edge on the left mounting tab.
13
Making sure the orifice holders protrude through the holes in the main top snap the front edge into place.
14
When replacing the burner heads first connect the spark wires to the surface igniters.
15
Align the heads and rethread the screws to secure.
16
Replace the burner caps and reposition the grates.
17
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com