Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Oven Replace Control Board #W10556710
Whirlpool Gas Range Oven Replace Control Board #W10556710
Skill Level
Total Parts Cost
$206.65Estimated Savings
$112.5002:29
- Description
This video provides step-by-step instructions for replacing the oven control board on a Whirlpool gas range. The most common reasons for replacing the oven control board are if the oven doesn’t bake or broil evenly, its fan keeps running, it won’t heat, won’t turn on, or won’t turn off, and simpler components of the circuit prove not to be at fault.
All of the information in this oven control board replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver
All of the information in this oven control board replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver
Step By Step Instructions
1
Before you replace the oven control board in your range unplug the power cord.
2
Using a phillips-head screwdriver, unthread the screws securing the upper rear access panel.
3
Lift the panel up and out to remove.
4
Note the orientation of the wire harness connecters then disconnect them from the control board.
5
Set the insulation aside and unthread the control board mounting screws.
6
With the screws unthreaded, pull the old board away from the control panel.
7
Install the new oven control board by aligning it on the control panel then replace the mounting screws to secure.
8
Connect the wire harness connecters.
9
Replace the insulation.
10
Reinstall the access panel by inserting the tabs into the slots.
11
Thread and tighten the screws to secure.
12
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step instructions for replacing the oven control board on a Whirlpool gas range. The most common reasons for replacing the oven control board are if the oven doesn’t bake or broil evenly, its fan keeps running, it won’t heat, won’t turn on, or won’t turn off, and simpler components of the circuit prove not to be at fault.
All of the information in this oven control board replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver
All of the information in this oven control board replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the oven control board in your range unplug the power cord.
2
Using a phillips-head screwdriver, unthread the screws securing the upper rear access panel.
3
Lift the panel up and out to remove.
4
Note the orientation of the wire harness connecters then disconnect them from the control board.
5
Set the insulation aside and unthread the control board mounting screws.
6
With the screws unthreaded, pull the old board away from the control panel.
7
Install the new oven control board by aligning it on the control panel then replace the mounting screws to secure.
8
Connect the wire harness connecters.
9
Replace the insulation.
10
Reinstall the access panel by inserting the tabs into the slots.
11
Thread and tighten the screws to secure.
12
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Parts Needed
Oven Control Board
$206.65
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com