Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Pressure Regulator Replacement #W10633327
Whirlpool Gas Pressure Regulator Replacement #W10633327
Skill Level
Total Parts Cost
$123.99Estimated Savings
$112.5003:52
- Description
This video provides step-by-step instructions for replacing the pressure regulator on a Whirlpool gas range. The most common reason for replacing the regulator is when the oven won’t heat, but this not usually the cause of that problem.
All of the information in this regulator replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver, 9/16 inch wrench, adjustable wrench
All of the information in this regulator replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver, 9/16 inch wrench, adjustable wrench
Step By Step Instructions
1
Before you replace the regulator in your range unplug the power cord
2
Shut off the gas supply.
3
Unthread the gas supply line from the regulator.
4
Use an adjustable wrench to remove the fitting.
5
Next, use a 9/16th inch wrench to unthread the nuts securing the gas lines to the regulator.
6
Using a phillips-head screwdriver, unthread the regulator mounting screws.
7
With the screws unthreaded, you can lift out the old regulator and bracket.
8
Prepare the new regulator for installation by transferring the mounting bracket from the old regulator to the new one.
9
Remove any port plugs or covers then align the new regulator and bracket on the rear panel insert the gas lines then thread the nuts loosely.
10
Replace the mounting screws to secure the bracket and regulator.
11
With the regulator secured, tighten the gas line nuts.
12
Apply sealant to the threads of the fitting then thread the fitting into the regulator and tighten.
13
Reattach the gas supply line.
14
Confirm that the regulator valve is in the “on” position.
15
Turn the gas supply back on.
16
To verify there are no gas leaks apply a dish soap and water solution to the gas line connections.
17
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step instructions for replacing the pressure regulator on a Whirlpool gas range. The most common reason for replacing the regulator is when the oven won’t heat, but this not usually the cause of that problem.
All of the information in this regulator replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver, 9/16 inch wrench, adjustable wrench
All of the information in this regulator replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver, 9/16 inch wrench, adjustable wrench
Step-By-Step Instructions
1
Before you replace the regulator in your range unplug the power cord
2
Shut off the gas supply.
3
Unthread the gas supply line from the regulator.
4
Use an adjustable wrench to remove the fitting.
5
Next, use a 9/16th inch wrench to unthread the nuts securing the gas lines to the regulator.
6
Using a phillips-head screwdriver, unthread the regulator mounting screws.
7
With the screws unthreaded, you can lift out the old regulator and bracket.
8
Prepare the new regulator for installation by transferring the mounting bracket from the old regulator to the new one.
9
Remove any port plugs or covers then align the new regulator and bracket on the rear panel insert the gas lines then thread the nuts loosely.
10
Replace the mounting screws to secure the bracket and regulator.
11
With the regulator secured, tighten the gas line nuts.
12
Apply sealant to the threads of the fitting then thread the fitting into the regulator and tighten.
13
Reattach the gas supply line.
14
Confirm that the regulator valve is in the “on” position.
15
Turn the gas supply back on.
16
To verify there are no gas leaks apply a dish soap and water solution to the gas line connections.
17
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Parts Needed
Pressure Regulator
$123.99
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com