Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Oven Burner Tube Replacement #W10650358
Whirlpool Gas Range Oven Burner Tube Replacement #W10650358
Skill Level
Total Parts Cost
$142.99Estimated Savings
$112.5002:24
- Description
This video provides step-by-step instructions for replacing the oven burner tube on a Whirlpool gas range. The most common reasons for replacing the oven burner tube are when the oven takes too long to bake or when the oven over-bakes food.
All of the information in this burner tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: 5/16 inch socket
All of the information in this burner tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: 5/16 inch socket
Step By Step Instructions
1
Before you replace the oven burner tube in your range, unplug the power cord, open the oven door, and remove the racks.
2
Lift the lower access panel up from the rear and slide it back to remove.
3
Unthread the mounting screws securing the burner tube, detach the tube, and use a 5/16 inch socket or nut driver to unthread the two mounting screws securing the igniter.
4
Before you install the new burner tube, confirm that the air shutter is in the same position as the old one.
5
Now align the igniter on the tube and secure it with the screws.
6
Position the new burner tube and replace the mounting screw to secure.
7
Replace the lower access panel by inserting the front edge under the oven door frame, then push the rear of the panel into place.
8
Reinstall the oven racks.
9
With the repair completed, plug the power cord back in, and your range should be ready for use.
Description
This video provides step-by-step instructions for replacing the oven burner tube on a Whirlpool gas range. The most common reasons for replacing the oven burner tube are when the oven takes too long to bake or when the oven over-bakes food.
All of the information in this burner tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: 5/16 inch socket
All of the information in this burner tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: 5/16 inch socket
Step-By-Step Instructions
1
Before you replace the oven burner tube in your range, unplug the power cord, open the oven door, and remove the racks.
2
Lift the lower access panel up from the rear and slide it back to remove.
3
Unthread the mounting screws securing the burner tube, detach the tube, and use a 5/16 inch socket or nut driver to unthread the two mounting screws securing the igniter.
4
Before you install the new burner tube, confirm that the air shutter is in the same position as the old one.
5
Now align the igniter on the tube and secure it with the screws.
6
Position the new burner tube and replace the mounting screw to secure.
7
Replace the lower access panel by inserting the front edge under the oven door frame, then push the rear of the panel into place.
8
Reinstall the oven racks.
9
With the repair completed, plug the power cord back in, and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com