Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Front Leveling Leg Replacement #W10819918
Whirlpool Gas Range Front Leveling Leg Replacement #W10819918
Skill Level
Total Parts Cost
$20.35Estimated Savings
$112.5001:29
- Description
This video provides step-by-step instructions for replacing the front leveling leg on a Whirlpool gas range. The most common reason for replacing the leg is if the range is off-balance.
All of the information in this leg replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver
All of the information in this leg replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver
Step By Step Instructions
1
To replace a front leveling leg on your range carefully lift the front of the range up and support it with a wood block or a comparable sturdy object.
2
Using a phillips-head screwdriver, unthread the screws securing the leveling leg bracket.
3
Install the new front leveling leg by aligning the bracket then thread and tighten the screws to secure.
4
Remove the support.
5
Determine if the range is level.
6
If it isn’t support the range and adjust the leg.
7
Repeat this procedure until you can confirm that the range is level and ready for use.
Description
This video provides step-by-step instructions for replacing the front leveling leg on a Whirlpool gas range. The most common reason for replacing the leg is if the range is off-balance.
All of the information in this leg replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver
All of the information in this leg replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Tools used: phillips head screwdriver
Step-By-Step Instructions
1
To replace a front leveling leg on your range carefully lift the front of the range up and support it with a wood block or a comparable sturdy object.
2
Using a phillips-head screwdriver, unthread the screws securing the leveling leg bracket.
3
Install the new front leveling leg by aligning the bracket then thread and tighten the screws to secure.
4
Remove the support.
5
Determine if the range is level.
6
If it isn’t support the range and adjust the leg.
7
Repeat this procedure until you can confirm that the range is level and ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com