Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Electric Dryer Timer Replacement #W10846428
Whirlpool Electric Dryer Timer Replacement #W10846428
Skill Level
Total Parts Cost
$153.76Estimated Savings
$112.5002:54
- Description
This video provides step-by-step repair instructions for replacing the timer on a Whirlpool electric dryer. The most common reason for replacing the timer is if the dryer won’t start and more likely causes have been ruled out.
This timer replacement video is applicable to the following brands:
Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
This timer replacement video is applicable to the following brands:
Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Before you replace the timer in your dryer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screw securing the control panel.
3
Insert a putty knife under the control panel to release the two spring clips.
4
Pull the panel forward to fully detach.
5
Note the orientation of the wire connecters attached to the timer then disconnect them.
6
Unthread the two mounting screws securing the timer to the control panel.
7
Detach the timer knob and you can remove the old timer.
8
Install the new timer by positioning it in the control panel.
9
Rethread the mounting screws to secure.
10
You’ll need to realign the buzzer and secure it under the right screw.
11
Connect the wire connecters to the appropriate terminals on the new timer.
12
Replace the timer knob.
13
Realign the control panel on the upper rear panel, making sure the tabs are inserted into the slots in the main top.
14
Push the control panel down to snap the spring clips into place.
15
Rethread the rear screw to secure.
16
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the timer on a Whirlpool electric dryer. The most common reason for replacing the timer is if the dryer won’t start and more likely causes have been ruled out.
This timer replacement video is applicable to the following brands:
Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
This timer replacement video is applicable to the following brands:
Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Before you replace the timer in your dryer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screw securing the control panel.
3
Insert a putty knife under the control panel to release the two spring clips.
4
Pull the panel forward to fully detach.
5
Note the orientation of the wire connecters attached to the timer then disconnect them.
6
Unthread the two mounting screws securing the timer to the control panel.
7
Detach the timer knob and you can remove the old timer.
8
Install the new timer by positioning it in the control panel.
9
Rethread the mounting screws to secure.
10
You’ll need to realign the buzzer and secure it under the right screw.
11
Connect the wire connecters to the appropriate terminals on the new timer.
12
Replace the timer knob.
13
Realign the control panel on the upper rear panel, making sure the tabs are inserted into the slots in the main top.
14
Push the control panel down to snap the spring clips into place.
15
Rethread the rear screw to secure.
16
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Timer
$153.76
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com