Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Electric Dryer Drum Assembly Replacement #W10757750
Whirlpool Electric Dryer Drum Assembly Replacement #W10757750
Skill Level
Total Parts Cost
$144.15Estimated Savings
$112.5004:02
- Description
This video provides step-by-step repair instructions for replacing the drum assembly on a Whirlpool electric dryer. The most common reason for replacing the drum is if it is damaged.
This dryer drum assembly replacement video is applicable to the following brands:
Whirlpool
Tools needed: Phillips-head screwdriver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
This dryer drum assembly replacement video is applicable to the following brands:
Whirlpool
Tools needed: Phillips-head screwdriver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Before you replace the drum assembly in your dryer be sure to unplug the power cord.
2
Remove the lint filter and use a phillips-head screwdriver to unthread the two screws securing the main top to the filter housing.
3
Now insert a putty knife under the main top to release the two spring clips.
4
Lift the main top up and support it.
5
Disconnect the door switch wire connector.
6
Using a 5/16th inch socket or nut driver, unthread the screws securing the front panel.
7
Now carefully lift up the front panel to fully detach it from the cabinet.
8
Reach under the drum and unthread the belt from the pulley and motor shaft.
9
You can use the belt to help lift our the drum.
10
Prepare the new drum assembly for installation by snapping the glides into place on the rim of the drum.
11
Slide the belt over the new drum with the grooved side facing inward.
12
Position the drum in the cabinet by aligning it on the rear rollers.
13
Make sure the idler pulley is properly positioned then loop the belt on the pulley and motor shaft in a zigzag formation.
14
Rotate the drum to help align the belt.
15
Now reposition the front panel by first aligning the drum then hook the panel on the mounting clips and push down.
16
Replace the screws to secure the panel.
17
Reconnect the door switch wire connector.
18
Lower the main top and snap it into place.
19
Rethread the screws in the lint filter housing.
20
Replace the lint filter with the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drum assembly on a Whirlpool electric dryer. The most common reason for replacing the drum is if it is damaged.
This dryer drum assembly replacement video is applicable to the following brands:
Whirlpool
Tools needed: Phillips-head screwdriver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
This dryer drum assembly replacement video is applicable to the following brands:
Whirlpool
Tools needed: Phillips-head screwdriver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Before you replace the drum assembly in your dryer be sure to unplug the power cord.
2
Remove the lint filter and use a phillips-head screwdriver to unthread the two screws securing the main top to the filter housing.
3
Now insert a putty knife under the main top to release the two spring clips.
4
Lift the main top up and support it.
5
Disconnect the door switch wire connector.
6
Using a 5/16th inch socket or nut driver, unthread the screws securing the front panel.
7
Now carefully lift up the front panel to fully detach it from the cabinet.
8
Reach under the drum and unthread the belt from the pulley and motor shaft.
9
You can use the belt to help lift our the drum.
10
Prepare the new drum assembly for installation by snapping the glides into place on the rim of the drum.
11
Slide the belt over the new drum with the grooved side facing inward.
12
Position the drum in the cabinet by aligning it on the rear rollers.
13
Make sure the idler pulley is properly positioned then loop the belt on the pulley and motor shaft in a zigzag formation.
14
Rotate the drum to help align the belt.
15
Now reposition the front panel by first aligning the drum then hook the panel on the mounting clips and push down.
16
Replace the screws to secure the panel.
17
Reconnect the door switch wire connector.
18
Lower the main top and snap it into place.
19
Rethread the screws in the lint filter housing.
20
Replace the lint filter with the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Drum Assembly
$144.15
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com