Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Electric Dryer Control Panel Assembly #WPW10639903
Whirlpool Electric Dryer Control Panel Assembly #WPW10639903
Skill Level
Total Parts Cost
$368.86Estimated Savings
$112.5003:20
- Description
This video provides step-by-step repair instructions for replacing the control panel assembly on a Whirlpool electric dryer. The most common reason for replacing the control panel is if the washer won’t start.
This control panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: 5/16th inch socket or nut driver, quarter-inch socket or nut driver
Don't forget to like and comment on this video and subscribe to our channel!
This control panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: 5/16th inch socket or nut driver, quarter-inch socket or nut driver
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Before you replace the control panel assembly on your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Use a quarter-inch socket or nut driver to unthread the control panel housing mounting screws.
5
Disconnect the control panel wire connecter from the main control board.
6
Lift up the tabs to detach the housing.
7
Set the housing on a sturdy surface and disconnect the wire connecter from the control panel.
8
Using the quarter-inch socket or nut driver, unthread the screws securing the control panel to the housing.
9
Detach the old panel.
10
Prepare the new control panel assembly for installation by first peeling off the protective covering.
11
Now insert the panel into the housing then thread the screws to secure.
12
Connect the wire connecter.
13
Insert the lower housing tabs into the slots in the front panel and snap the housing into place.
14
Rethread the mounting screws.
15
Connect the wire connecter to the main control board.
16
Realign the top panel and slide it into position.
17
Secure the screws.
18
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the control panel assembly on a Whirlpool electric dryer. The most common reason for replacing the control panel is if the washer won’t start.
This control panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: 5/16th inch socket or nut driver, quarter-inch socket or nut driver
Don't forget to like and comment on this video and subscribe to our channel!
This control panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: 5/16th inch socket or nut driver, quarter-inch socket or nut driver
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Before you replace the control panel assembly on your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Use a quarter-inch socket or nut driver to unthread the control panel housing mounting screws.
5
Disconnect the control panel wire connecter from the main control board.
6
Lift up the tabs to detach the housing.
7
Set the housing on a sturdy surface and disconnect the wire connecter from the control panel.
8
Using the quarter-inch socket or nut driver, unthread the screws securing the control panel to the housing.
9
Detach the old panel.
10
Prepare the new control panel assembly for installation by first peeling off the protective covering.
11
Now insert the panel into the housing then thread the screws to secure.
12
Connect the wire connecter.
13
Insert the lower housing tabs into the slots in the front panel and snap the housing into place.
14
Rethread the mounting screws.
15
Connect the wire connecter to the main control board.
16
Realign the top panel and slide it into position.
17
Secure the screws.
18
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Control Panel
$368.86
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com