Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairMaytag Dryer Door Catch Replacement #LA-1003
Maytag Dryer Door Catch Replacement #LA-1003
Skill Level
Total Parts Cost
$28.33Estimated Savings
$112.5002:57
- Description
This video provides step-by-step instructions for replacing the door catch on Maytag dryers. The most common reason for replacing the door catch is the dryer door not staying shut.
All of the information in this door catch replacement video is applicable to the following brands: Maytag
Tools used: 5/16 inch nut driver, pliers
All of the information in this door catch replacement video is applicable to the following brands: Maytag
Tools used: 5/16 inch nut driver, pliers
Step By Step Instructions
1
Before you replace the door catch in your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the screws securing the lower access panel.
3
Detach the panel.
4
Next, unthread the screws securing the bottom of the front panel.
5
Pull the panel out from the bottom to detach.
6
Note the orientation of the wires connected to the door switch then disconnect them.
7
Open the dryer door and use pliers to depress the retaining tabs to release the old catch.
8
You can use the pliers to remove the old door strike as well.
9
Install the new door catch components
10
By inserting the strike into the door and snapping the catch into place in the front panel.
11
Replace the front panel by first reconnecting the door switch wires to the appropriate terminals.
12
Now hook the retaining clips under the main top fully reposition the panel and rethread the screws at the bottom.
13
Realign the lower access panel and secure it with the screws.
14
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the door catch on Maytag dryers. The most common reason for replacing the door catch is the dryer door not staying shut.
All of the information in this door catch replacement video is applicable to the following brands: Maytag
Tools used: 5/16 inch nut driver, pliers
All of the information in this door catch replacement video is applicable to the following brands: Maytag
Tools used: 5/16 inch nut driver, pliers
Step-By-Step Instructions
1
Before you replace the door catch in your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the screws securing the lower access panel.
3
Detach the panel.
4
Next, unthread the screws securing the bottom of the front panel.
5
Pull the panel out from the bottom to detach.
6
Note the orientation of the wires connected to the door switch then disconnect them.
7
Open the dryer door and use pliers to depress the retaining tabs to release the old catch.
8
You can use the pliers to remove the old door strike as well.
9
Install the new door catch components
10
By inserting the strike into the door and snapping the catch into place in the front panel.
11
Replace the front panel by first reconnecting the door switch wires to the appropriate terminals.
12
Now hook the retaining clips under the main top fully reposition the panel and rethread the screws at the bottom.
13
Realign the lower access panel and secure it with the screws.
14
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Door Catch
$28.33
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com