Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Right Door Stop Replacement #241868401
Frigidaire Refrigerator Right Door Stop Replacement #241868401
Skill Level
Total Parts Cost
$15.33Estimated Savings
$112.5003:31
- Description
This video provides step-by-step repair instructions for replacing the right door stop on a Frigidaire refrigerator. The most common reason for replacing the door stop is if the door will not stay open properly.
All of the information for this refrigerator door stop replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket or nut driver, 1/4" nut driver, phillips head screwdriver
All of the information for this refrigerator door stop replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket or nut driver, 1/4" nut driver, phillips head screwdriver
Step By Step Instructions
1
Before you replace the right door stop on your refrigerator be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the screws securing the right side hinge cover.
3
Lift off the cover.
4
Disconnect the wire connecter and unthread the screw to release the grounding wire.
5
Support the door and use a 3/8th inch socket or nut driver to unthread the screws securing the hinge plate.
6
Unhook the wires from the retaining clip and remove the hinge plate.
7
Carefully lift off the refrigerator door and set it on a towel or blanket.
8
Note the orientation of the door stop and the screw that secures it then use a phillips-head screwdriver or a number two square drive bit to unthread the screw and remove the old stop.
9
Install the new door stop by properly aligning it on the hinge cam then thread and tighten the screw to secure.
10
Reinstall the door by aligning it on the lower hinge pin.
11
Support the door as you realign the hinge plate and secure it with the screws.
12
Connect the wire connecter and secure the grounding wire with the screw.
13
Make sure the wires are secured under the retaining clip.
14
Replace the hinge cover and secure it with the screws – the longer screw goes in the rear.
15
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the right door stop on a Frigidaire refrigerator. The most common reason for replacing the door stop is if the door will not stay open properly.
All of the information for this refrigerator door stop replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket or nut driver, 1/4" nut driver, phillips head screwdriver
All of the information for this refrigerator door stop replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket or nut driver, 1/4" nut driver, phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the right door stop on your refrigerator be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the screws securing the right side hinge cover.
3
Lift off the cover.
4
Disconnect the wire connecter and unthread the screw to release the grounding wire.
5
Support the door and use a 3/8th inch socket or nut driver to unthread the screws securing the hinge plate.
6
Unhook the wires from the retaining clip and remove the hinge plate.
7
Carefully lift off the refrigerator door and set it on a towel or blanket.
8
Note the orientation of the door stop and the screw that secures it then use a phillips-head screwdriver or a number two square drive bit to unthread the screw and remove the old stop.
9
Install the new door stop by properly aligning it on the hinge cam then thread and tighten the screw to secure.
10
Reinstall the door by aligning it on the lower hinge pin.
11
Support the door as you realign the hinge plate and secure it with the screws.
12
Connect the wire connecter and secure the grounding wire with the screw.
13
Make sure the wires are secured under the retaining clip.
14
Replace the hinge cover and secure it with the screws – the longer screw goes in the rear.
15
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Door Stop
$15.33
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com