Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Door Switch Replacement #241835505
Frigidaire Refrigerator Door Switch Replacement #241835505
Skill Level
Total Parts Cost
$87.94Estimated Savings
$112.5002:28
- Description
This video provides step-by-step repair instructions for replacing the door switch on a Frigidaire refrigerator. The most common reason for replacing the switch is if the light in the refrigerator is not turning on.
All of the information for this refrigerator door switch replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket or nut driver
All of the information for this refrigerator door switch replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket or nut driver
Step By Step Instructions
1
Before you replace a door switch in your refrigerator be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the screws securing one of the hinge covers.
3
Lift off the cover.
4
Next, unthread the four mounting screws securing the switch console.
5
Pull the console free and flip it over.
6
Note the orientation of the door switch you’re replacing then depress the retaining tabs to detach the switch.
7
Disconnect the wire connecter and you can fully remove the old switch.
8
Install the new door switch by inserting it in the console.
9
Connect the wire connecter and snap the switch into place.
10
Reposition the console ..then rethread and tighten the mounting screws.
11
Replace the hinge cover and secure it with the screws. – the longer screw goes in the rear.
12
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door switch on a Frigidaire refrigerator. The most common reason for replacing the switch is if the light in the refrigerator is not turning on.
All of the information for this refrigerator door switch replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket or nut driver
All of the information for this refrigerator door switch replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket or nut driver
Step-By-Step Instructions
1
Before you replace a door switch in your refrigerator be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the screws securing one of the hinge covers.
3
Lift off the cover.
4
Next, unthread the four mounting screws securing the switch console.
5
Pull the console free and flip it over.
6
Note the orientation of the door switch you’re replacing then depress the retaining tabs to detach the switch.
7
Disconnect the wire connecter and you can fully remove the old switch.
8
Install the new door switch by inserting it in the console.
9
Connect the wire connecter and snap the switch into place.
10
Reposition the console ..then rethread and tighten the mounting screws.
11
Replace the hinge cover and secure it with the screws. – the longer screw goes in the rear.
12
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Door Switch
$87.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com