DescriptionThis video provides step-by-step repair instructions for replacing the drain tube on a Frigidaire refrigerator. The most common reason for replacing the drain tube is if it is leaking.
All of the information for this refrigerator drain tube replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket or nut driver
Step-By-Step Instructions1
Before you replace the drain tube in your refrigerator be sure to unplug the power cord
2
Shut off the water supply.
3
Use a quarter-inch socket or nut driver to unthread the screw securing the water supply line retainer to the rear panel.
4
Detach the water supply line from the inlet valve.
5
Next, unthread the remaining screws securing the rear access panel.
7
Detach the drain tube from the coupler.
8
Release the tube from the retaining clip and pull the old tube to detach it from the tape if necessary.
9
Install the new drain tube by positioning one end in the drip pan.
10
Secure the tube under the retaining clip and attach the opposite end to the coupler.
11
Reposition the rear access panel and secure it with the screws.
12
Reattach the water supply line to the inlet valve.
13
Secure the line to the rear panel with the retainer.
14
With the repair completed turn the water supply back on
15
Plug the power cord back in and your refrigerator should be ready for use.