Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Replace Mullion Mounting Pin #241779401
Frigidaire Refrigerator Replace Mullion Mounting Pin #241779401
Skill Level
Total Parts Cost
$33.77Estimated Savings
$112.5001:50
- Description
This video provides step-by-step repair instructions for replacing the mullion mounting pin on a Frigidaire refrigerator. The most common reason for replacing the pin is if the mullion is not secured properly, or the door will not close properly.
All of the information for this refrigerator mullion mounting pin replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver or #2 square bit
All of the information for this refrigerator mullion mounting pin replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver or #2 square bit
Step By Step Instructions
1
Before you replace a mullion mounting pin on your refrigerator be sure to unplug the power cord.
2
Using a phillips-head screwdriver or a number two square drive bit, unthread the mounting screw securing the mullion flipper assembly.
3
Lift the assembly up to detach then disconnect the wire connecter to fully remove.
4
If still intact, lift the old mounting pin off of the door liner.
5
Install the new mullion mounting pin by aligning it on the tab and pushing down.
6
Reinstall the mullion flipper assembly by first connecting the wire connecter.
7
With the center hinge open, align the assembly on the mounting pins and push down.
8
Thread and tighten the mounting screw.
9
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the mullion mounting pin on a Frigidaire refrigerator. The most common reason for replacing the pin is if the mullion is not secured properly, or the door will not close properly.
All of the information for this refrigerator mullion mounting pin replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver or #2 square bit
All of the information for this refrigerator mullion mounting pin replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver or #2 square bit
Step-By-Step Instructions
1
Before you replace a mullion mounting pin on your refrigerator be sure to unplug the power cord.
2
Using a phillips-head screwdriver or a number two square drive bit, unthread the mounting screw securing the mullion flipper assembly.
3
Lift the assembly up to detach then disconnect the wire connecter to fully remove.
4
If still intact, lift the old mounting pin off of the door liner.
5
Install the new mullion mounting pin by aligning it on the tab and pushing down.
6
Reinstall the mullion flipper assembly by first connecting the wire connecter.
7
With the center hinge open, align the assembly on the mounting pins and push down.
8
Thread and tighten the mounting screw.
9
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Hinge Pin
$33.77
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com